参数资料
型号: PS200-I/SO
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO20
封装: 0.300 INCH, PLASTIC, MS-013, SOIC-20
文件页数: 2/36页
文件大小: 537K
代理商: PS200-I/SO
PS200
DS21891B-page 8
2005 Microchip Technology Inc.
2.2.5
CURRENT REGULATION STATE
The Current Regulation state can be entered from the
Precharge state or Charge Qualification state. Battery
charging is initiated. This state provides constant
current, voltage limited charging (refer to Figure 2-2).
The charge current is referred to as IREG or the regula-
tion current. While the current is applied, the battery’s
voltage increases until it reaches a voltage limit
referred to as VREG or regulation voltage. Charging
continues, during which battery voltage and tempera-
ture are monitored. There are three possible next
states.
1.
If the battery’s voltage reaches or exceeds the
voltage limit, VREG and its temperature remains
below the maximum allowable during current
regulated charging (TMAXCHG), then the next
state is Voltage Regulation (F).
2.
If the battery exhibits any one of the following
conditions then the next state is Charge
Suspend (C):
- Battery voltage exceeds upper voltage limit
for charging (VMAX)
- Battery temperature exceeds upper
temperature limit for charging (TMAX)
- Battery temperature is below the lower
temperature limit for charging (TMIN)
If the time in the Current Regulation state
exceeds the time limit (ti), then the next state is
Charge Suspend (C).
3.
If the battery pack is taken away (BATPRES = 0),
then the PS200 enters the Charge Pending (A)
state.
2.2.6
VOLTAGE REGULATION STATE
Voltage Regulation provides charging at a constant
voltage while the charge current decreases (or tapers)
to the user specified minimum current threshold (IMIN).
There are three possible next states.
1.
When the charge current reaches the taper
current threshold for End-Of-Charge (IMIN) and
the battery’s voltage remains at the regulated
voltage value (VREG), then the battery has
reached the Charge Complete (G) state.
2.
If the battery exhibits any one of the following
conditions, then the next state is Charge
Suspend (C).
- Battery voltage exceeds upper voltage limit
for charging (VMAX)
- Battery temperature exceeds upper
temperature limit for charging (TMAXCHG)
If the time in the Voltage Regulation state
exceeds the time limit (tv), then the next state is
Charge Suspend (C).
3.
If the battery pack is taken away (BATPRES = 0),
then the PS200 enters the Charge Pending (A)
state.
2.2.7
CHARGE CYCLE COMPLETE STATE
The user specified minimum current threshold (IMIN)
can be configured for various charging temperatures.
At this threshold, charging is terminated and the End-
Of-Charge state is reached. The PS200 can renew the
charge cycle by entering the Charge Pending (A) state
when: 1) the battery is removed (BATPRES = 0), or 2) if
the battery’s voltage falls below the recharge threshold
voltage (VRCHG).
FIGURE 2-2:
PS200 CHARGING PROFILE
Time
Precharge
Battery Voltage
Charge Current
Current Regulation
Voltage Regulation
VREG
IREG
IMIN
Vo
lt
a
g
e
Cu
rr
ent
相关PDF资料
PDF描述
PS21997-4A AC MOTOR CONTROLLER, DMA25
PS21997-4 AC MOTOR CONTROLLER, DMA25
PS21997-4C AC MOTOR CONTROLLER, DMA25
PS323CSA DUAL 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO8
PS323EUA DUAL 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO8
相关代理商/技术参数
参数描述
PS-200-MCP 制造商:SPC Multicomp 功能描述:BRIEF CASE CONDUCTIVE 制造商:SPC Multicomp 功能描述:BRIEF CASE, CONDUCTIVE
PS200-NA 制造商:EMCORE 制造商全称:Emcore Corporation 功能描述:Optiva SERIES Professional Media Transport
PS200R 制造商:PANJIT 制造商全称:Pan Jit International Inc. 功能描述:FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)
PS200R _AY _10001 制造商:PanJit Touch Screens 功能描述:
PS200R_04 制造商:PANJIT 制造商全称:Pan Jit International Inc. 功能描述:FAST SWITCHING PLASTIC RECTIFIER