参数资料
| 型号： | PS2502-4-A |
| 厂商： | CEL |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER 4CH DARLINGTON D |
| 产品目录绘图： | NEC Pin Out |
| 其它图纸： | Darlington Quad Circuit |
| 标准包装： | 20 |
| 系列： | NEPOC |
| 通道数： | 4 |
| 输入类型： | DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 200% @ 1mA |
| 输出电压： | 40V |
| 电流 - 输出 / 通道： | 160mA |
| 电流 - DC 正向(If)： | 80mA |
| Vce饱和（最大）： | 1V |
| 输出类型： | 达林顿晶体管 |
| 安装类型： | 通孔 |
| 封装/外壳： | 16-DIP |
| 包装： | 管件 |
| 产品目录页面： | 2754 (CN2011-ZH PDF) |
| 其它名称： | PS2502-4A |
PS2502-1,-4,PS2502L-1,-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260 ° C MAX.
220 ° C
to 60 s
180 ° C
120 ° C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
? Peak temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
10
Data Sheet PN10226EJ04V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| 3-1546963-3 | BARRIER STRIP 7CIRC .438" |
| 3-1546963-8 | BARRIER STRIP 7CIRC .438" |
| 3-1546963-2 | BARRIER STRIP 7CIRC .438" |
| PS2805C-4-M-A | OPTOISOLATR 4CH TRANS IN 16-SSOP |
| PS2805C-4-A | OPTOCOUPLER 16PIN QUAD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2502-4SM | 制造商:Isocom Components 功能描述:OPTO COUPLER, 16 PIN PHOTO DARLINGTON, 4 PINS PER CHANNEL |
| PS2502-4X | 制造商:ISOCOM 制造商全称:ISOCOM 功能描述:HIGH DENSITY MOUNTING PHOTODARLINGTON OPTICALLY COUPLED ISOLATORS |
| PS-250-2A-15 | 功能描述:CONN HOUSING PS .250 DUAL VERT RoHS:是 类别:连接器，互连式 >> 端子 - 外壳，套 系列:PS RoHS指令信息:171370-1 Statement of Compliance 3D 型号:171370-1.pdf 标准包装:500 系列:- 样式:体座 端子类型:磁导线 类型:母型，插座 端子尺寸:- 位置数:3 堆叠方向:侧面至侧面 适用于相关产品:- 安装类型:自由悬挂 颜色:黑 材质:酚醛塑料 请注意:不提供触点 其它名称:171370-1-NDA106982 |
| PS-250-2A-15(N) | 制造商:JST Manufacturing 功能描述:CONN HOUSING PS .250 DUAL VERT |
| PS-250-2-BK-2 | 制造商:Brady Corporation 功能描述:1.000 IN W X 0.439 IN H (25.400 MM W X 11.150 MM H) |
发布紧急采购，3分钟左右您将得到回复。