参数资料
| 型号： | PS2581L2-W-A |
| 厂商： | CEL |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER 1CH TRANS OUT 4SMD |
| 标准包装： | 100 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 130% @ 5mA |
| 电流传输比（最大）： | 260% @ 5mA |
| 输出电压： | 80V |
| 电流 - 输出 / 通道： | 50mA |
| 电流 - DC 正向(If)： | 80mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SMD，鸥翼型 |
| 包装： | 管件 |
PS2581L1,PS2581L2
(4) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below I F = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
10
Data Sheet PN10239EJ02V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS2701-1-M-A | OPTOISOLATOR 1CH TRANS OUT 4-SOP |
| PS2701A-1-F4-A | PHOTOCOUPLER 1CH DARL 4-SOP |
| PS2702-1-V-F3-K-A | PHOTOCOUPLER 1CH DARL OUT 4-SOP |
| PS2703-1-F3 | OPTO COUPLER 1CH TRANS OUT SM |
| PS2705-1-F3-M-A | PHOTOCOUPLER 1CH TRANS OUT 4-SOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2581L2W-E3 | 制造商:NEC 制造商全称:NEC 功能描述:NPN-OUTPUT DC-INPUT OPTOCOUPLER |
| PS2581L2W-E4 | 制造商:NEC 制造商全称:NEC 功能描述:NPN-OUTPUT DC-INPUT OPTOCOUPLER |
| PS25B0500-1 | 功能描述:EMI 垫圈与接地垫 PCB RF Tile Hi Attenuation RoHS:否 制造商:Gore 长度:8 mm 宽度:2.5 mm 厚度:2.4 mm 产品类型:Pads |
| PS25B0500-1A | 功能描述:EMI 垫圈与接地垫 PCB RF Tile Hi Atten. w/Adh. RoHS:否 制造商:Gore 长度:8 mm 宽度:2.5 mm 厚度:2.4 mm 产品类型:Pads |
| PS25B0875-1 | 功能描述:EMI 垫圈与接地垫 PCB RF Tile Hi Attenuation RoHS:否 制造商:Gore 长度:8 mm 宽度:2.5 mm 厚度:2.4 mm 产品类型:Pads |
发布紧急采购，3分钟左右您将得到回复。