参数资料
| 型号： | PS2707-1-A |
| 厂商： | CEL |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER 1CH TRANS OUT SM |
| 标准包装： | 100 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | AC，DC |
| 电压 - 隔离： | 3750Vrms |
| 电流传输比（最小值）： | 10% @ 1mA |
| 电流传输比（最大）： | 400% @ 5mA |
| 输出电压： | 120V |
| 电流 - 输出 / 通道： | 30mA |
| 电流 - DC 正向(If)： | ±50mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SMD |
| 包装： | 管件 |
PS2707-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
Data Sheet PN10245EJ01V0DS
9
相关PDF资料 |
PDF描述 |
|---|---|
| PS2711-1-V-F3-A | PHOTOCOUPLER 1CH TRANS OUT 4-SOP |
| PS2715-1-A | PHOTOCOUPLER 1CH TRANS OUT SM |
| PS2732-1-V-A | PHOTOCOUPLER 1CH TRANS OUT SM |
| PS2733-1-V-F3-A | PHOTOCOUPLER 1CH TRANS OUT 4-SOP |
| PS2761-1-V-K-A | PHOTOCOUPLER 1CH TRANS OUT SM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2707-1-F3 | 制造商:California Eastern Laboratories (CEL) 功能描述:Optocoupler AC-IN 1-CH Transistor DC-OUT 4-Pin SOP T/R |
| PS2707-1-F3-A | 功能描述:晶体管输出光电耦合器 Hi-Iso Col Volt 1-Ch RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| PS2707-1-V | 制造商:NEC 制造商全称:NEC 功能描述:AC INPUT RESPONSE HIGH COLLECTOR TO EMITTER VOLTAGE TYPE SOP MULTI PHOTOCOUPLER SERIES |
| PS2707-2 | 功能描述:晶体管输出光电耦合器 REORD 551-PS2707-1 SO-8 OPTOCLR 2CH RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| PS2707-2-V | 制造商:NEC 制造商全称:NEC 功能描述:AC INPUT RESPONSE HIGH COLLECTOR TO EMITTER VOLTAGE TYPE SOP MULTI PHOTOCOUPLER SERIES |
发布紧急采购，3分钟左右您将得到回复。