参数资料
| 型号： | PS2805A-4-A |
| 厂商： | CEL |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | OPTOISOLATOR 4CH TRANSOUT 16SSOP |
| 产品目录绘图： | NEC Pin Out |
| 其它图纸： | Quad Circuit |
| 标准包装： | 45 |
| 系列： | NEPOC |
| 通道数： | 4 |
| 输入类型： | AC，DC |
| 电压 - 隔离： | 2500Vrms |
| 电流传输比（最小值）： | 50% @ 5mA |
| 电流传输比（最大）： | 400% @ 5mA |
| 输出电压： | 70V |
| 电流 - 输出 / 通道： | 30mA |
| 电流 - DC 正向(If)： | ±30mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.173"，4.40mm 宽） |
| 包装： | 管件 |
| 产品目录页面： | 2754 (CN2011-ZH PDF) |
PS2805A-1,PS2805A-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
? Peak Temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 ° C
10
Data Sheet PN10399EJ02V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| VHR-4N | CONN HOUSING VH 4POS 3.96MM WHT |
| PS2801A-4-A | OPTOISOLATOR 1CH TRANS OUT 16-SO |
| ACHR-04V-A-S | CONN RCPT ACH W-B 4POS 1.2MM |
| 927768-3 | CONN SOCKET 13.5-15.5AWG TIN |
| PC99-300-300-0.06-0 | PHASECHANGE 300X300X0.06MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2805A-4-F3 | 制造商:Renesas Electronics Corporation 功能描述: |
| PS2805C-1 | 制造商:CEL 制造商全称:CEL 功能描述:HIGH ISOLATION VOL TAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER |
| PS2805C-1-A | 功能描述:晶体管输出光电耦合器 Quad sgl Tr AC Couplr RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| PS2805C-1-A/M | 制造商:Renesas Electronics Corporation 功能描述:Optocoupler,Transistor Output,SSOP4 |
| PS2805C-1-F3 | 制造商:CEL 制造商全称:CEL 功能描述:HIGH ISOLATION VOL TAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。