参数资料
| 型号： | PS2805C-1-F3-A |
| 厂商： | CEL |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | OPTOISOLATOR 1CH TRANS IN 4SSOP |
| 产品目录绘图： | Photo Transistor Pin Out |
| 其它图纸： | Photo Transistor Circuit |
| 标准包装： | 1 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | AC，DC |
| 电压 - 隔离： | 2500Vrms |
| 电流传输比（最小值）： | 50% @ ±5mA |
| 电流传输比（最大）： | 400% @ ±5mA |
| 输出电压： | 80V |
| 电流 - 输出 / 通道： | 30mA |
| 电流 - DC 正向(If)： | ±30mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SOIC（0.170"，4.40mm） |
| 包装： | 标准包装 |
| 产品目录页面： | 2754 (CN2011-ZH PDF) |
| 其它名称： | PS2805C-1-F3-ADKR |
A Business Partner of Renesas Electronics Corporation.
PS2805C-1, PS2805C-4 e
<R>
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260 ° C MAX.
220 ° C
to 60 s
180 ° C
120 ° C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
? Peak Temperature (lead part temperature) 350 ° C or below
? Time (each pins) 3 seconds or less
? Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
R08DS0074EJ0300 Rev.3.00
Jan 9, 2013
Page 10 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| GBFTAX-21 | TERM BARRIER 21CIRC SGL ROW .438 |
| JW2SN-B-DC24V | RELAY GEN PURPOSE DPDT 5A 24V |
| G2RL-1-H DC5 | RELAY GEN PURPOSE SPDT 10A 5V |
| CBPW-16 | TERM BARRIER 16CIRC SGL ROW .375 |
| MAT-9 | TERM BARRIER 9CIRC DUAL ROW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2805C-1-F3-M-A | 功能描述:晶体管输出光电耦合器 4pin SSOP Single AC Coupler RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| PS2805C-1-M-A | 功能描述:OPTOISOLATOR 1CH TRANS IN 4SSOP RoHS:是 类别:隔离器 >> 光隔离器 - 晶体管，光电输出 系列:NEPOC 标准包装:100 系列:NEPOC 通道数:1 输入类型:DC 电压 - 隔离:5000Vrms 电流传输比（最小值）:130% @ 5mA 电流传输比（最大）:260% @ 5mA 输出电压:70V 电流 - 输出 / 通道:30mA 电流 - DC 正向(If):30mA Vce饱和（最大）:300mV 输出类型:晶体管 安装类型:通孔 封装/外壳:4-DIP（0.300"，7.62mm） 包装:管件 |
| PS2805C-1-V-F3 | 制造商:CEL 制造商全称:CEL 功能描述:HIGH ISOLATION VOL TAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER |
| PS2805C-1-V-F3-A | 制造商:California Eastern Laboratories (CEL) 功能描述:4PIN SSOP, QUAD SINGLE TR,AC, COUPLER, DIE SHRUNK VERSION, V - Tape and Reel 制造商:California Eastern Laboratories (CEL) 功能描述:OPTOCOUPLER 2.5KVRMS 400% 4SSOP |
| PS2805C3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
发布紧急采购，3分钟左右您将得到回复。