参数资料
| 型号： | PS2815-1-L-A |
| 厂商： | CEL |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER 1CH TRANS OUT SM |
| 标准包装： | 100 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | AC，DC |
| 电压 - 隔离： | 2500Vrms |
| 电流传输比（最小值）： | 100% @ ±1mA |
| 电流传输比（最大）： | 400% @ ±1mA |
| 输出电压： | 40V |
| 电流 - 输出 / 通道： | 40mA |
| 电流 - DC 正向(If)： | ±50mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SMD |
| 包装： | 管件 |
PS2815-1,PS2815-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260 ° C MAX.
220 ° C
to 60 s
180 ° C
120 ° C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
? Peak temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
10
Data Sheet PN10256EJ04V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| 917572-7 | 1.5 B-T-W PLUG HSG 7P BLACK |
| 1594BWGY | BOX ABS 3.19X2.21X1.58" GREY |
| 1594BWBK | BOX ABS 3.19X2.21X1.58" BLACK |
| 001106 | BOX ABS 4.94X2.78X0.85" BLACK |
| 1-172341-2 | CONN PLUG 12POS MINI-UMNL RED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS2815-1-V | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:LOW (AC) INPUT CURRENT, HIGH CTR 4, 16-PIN SSOP PHOTOCOUPLER |
| PS2815-1-V-A | 制造商:CEL 制造商全称:CEL 功能描述:LOW (AC) INPUT CURRENT, HIGH CTR 4, 16-PIN SSOP PHOTOCOUPLER |
| PS2815-1-V-F3 | 制造商:CEL 制造商全称:CEL 功能描述:LOW (AC) INPUT CURRENT, HIGH CTR 4, 16-PIN SSOP PHOTOCOUPLER |
| PS2815-1-V-F3-A | 功能描述:ISOLAT 2.5KVRMS TRANS 1CH 4SSOP RoHS:是 类别:隔离器 >> 光隔离器 - 晶体管，光电输出 系列:NEPOC 标准包装:100 系列:- 通道数:1 输入类型:AC，DC 电压 - 隔离:3750Vrms 电流传输比（最小值）:20% @ ±1mA 电流传输比（最大）:300% @ ±1mA 输出电压:80V 电流 - 输出 / 通道:- 电流 - DC 正向(If):±50mA Vce饱和（最大）:200mV 输出类型:晶体管 安装类型:表面贴装 封装/外壳:4-SOIC（0.170"，4.40mm） 包装:管件 |
| PS2815-1-V-F4 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:LOW (AC) INPUT CURRENT, HIGH CTR 4, 16-PIN SSOP PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。