参数资料
| 型号： | PS7052 |
| 厂商： | Microchip Technology |
| 文件页数： | 2/14页 |
| 文件大小： | 0K |
| 描述： | IC BATTERY MONITOR TWO CELL PROT |
| 标准包装： | 1 |
| 功能： | 电池监控器 |
| 电池化学： | 锂离子（Li-Ion） |
| 安装类型： | 需要支座 |
| 封装/外壳： | 模块 |
| 包装： | 散装 |
PS7051/PS7052
1.0
GENERAL DESCRIPTION
Step 1: Connect wires to module. Use large diameter
wire (18 AWG-20 AWG) or tabs for current carrying
The PS7051 and PS7052 modules are complete Smart
Battery controller subsystems based on the Microchip
PS700 battery monitor. The modules are designed to
operate in a battery pack consisting of one (1) or two
(2) series connected Lithium cells. The module con-
sists of the Microchip PS700 fuel gauge IC and a Seiko
battery protection IC.
lines from VR, V2 (PS7052 only) and V1. All others are
signal only lines (24 to 22 AWG).
Step 2: Connect V1 to the most positive point on the
battery cell stack.
Step 3: Connect VR to the most negative point on the
battery cell stack.
Step 4: For PS7052 only, connect V2 to the middle of
1.1
Quick Start – Pack Assembly
the cell stack.
Follow these directions to assemble a pack with the
PS705X module.
? Use standard precautions when handling static
sensitive devices.
? Modules should be connected to battery cells in
the order indicated below to insure proper start-up
and operation. Wires should be attached to the
modules first and then connected to the battery
cells as instructed.
? The connection sequence is critical to successful
use of the PS700 family of CMOS ASICs. The
pack positive should be securely connected to the
module first, followed by pack negative.
Step 5: Connect external connector to B-, C, D and B+.
Step 6: Program the assembled pack using Microchip’s
PowerMate? software and PowerCal? 2 board or
PowerInfo? 2 board hardware. The EEPROM param-
eters can be changed at will using the utilities on the EE
page in the PowerMate software.
Step 7: Calibrate the pack using the PowerMate
software and PowerCal 2 board hardware. The pack is
now ready for use.
FIGURE 1-1:
FIGURE 1-2:
PS7051 BOARD ASSEMBLY (SIDE 1)
PS7051 BOARD ASSEMBLY (SIDE 2)
V1
B+
C
D
B-
V2
DS21771B-page 2
? 2004 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| PS8101-V-K-A | PHOTOCOUPLR ANALOG HS OUT 5SO |
| PS8103-F3-A | OPTOISOLATOR ANALOG HS OUT 5S |
| PS8302L-E3-AX | PHOTOCOUPLER ANLG OUT 6DIP GULL |
| PS8501L1-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
| PS8502L1-V-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS7070 | 功能描述:处理器配件 PS700 Battery Monitr RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于: |
| PS7070EV | 功能描述:处理器配件 PS700 Battery Monitr RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于: |
| PS708001 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| PS70813-10 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| PS7090 | 制造商:Black Box Corporation 功能描述:POWER SUPPLY |
发布紧急采购，3分钟左右您将得到回复。