参数资料
| 型号： | PS7141-2A |
| 厂商： | CEL |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | SSR OCMOS FET 150MA NO 8-DIP |
| 标准包装： | 50 |
| 系列： | PS, OCMOS |
| 电路： | DPST（2 A 型） |
| 输出类型： | AC，DC |
| 导通状态电阻： | 30 欧姆 |
| 负载电流： | 150mA |
| 输入电压： | 1.2VDC |
| 电压 - 负载： | 0 ~ 400 V |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-DIP |
| 包装： | 管件 |
| 继电器类型： | 继电器 |
| 其它名称： | PS7141-2ANEC |
PS7141-2A,PS7141L-2A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
(3) Soldering by soldering iron
? Peak temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
(4) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10281EJ02V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| 644464-4 | CONN RECEPT 4POS 24AWG MTA156 |
| 0380090058 | STRIP MARKER 8 STD |
| 0380090055 | STRIP MARKER 7 STD |
| 644466-3 | CONN RECEPT 3POS 20AWG MTA156 |
| 0380090052 | STRIP MARKER 6 STD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS7141-2A(A) | 制造商:Renesas Electronics Corporation 功能描述: |
| PS7141-2A-A | 功能描述:固态继电器-PCB安装 2-Ch Normally Open RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| PS7141-2B | 功能描述:固态继电器-PCB安装 2-Ch Normally Closed RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| PS7141-2B-A | 功能描述:固态继电器-PCB安装 2-Ch Normally Closed RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| PS7141A-1A-A | 功能描述:固态继电器-PCB安装 1CH Form A HI V SSR RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。