参数资料
| 型号： | PS7200E-1A-E3-A |
| 厂商： | CEL |
| 文件页数： | 11/14页 |
| 文件大小： | 0K |
| 描述： | SSR OCMOS FET 250MA NO 4-SOP TR |
| 产品培训模块： | Solid State Relays |
| 标准包装： | 900 |
| 系列： | PS, OCMOS |
| 电路： | SPST-NO（1 Form A） |
| 输出类型： | AC，DC |
| 导通状态电阻： | 1.6 欧姆 |
| 负载电流： | 250mA |
| 输入电压： | 1.2VDC |
| 电压 - 负载： | 0 ~ 40 V |
| 安装类型： | 表面贴装 |
| 端接类型： | 鸥翼型 |
| 封装/外壳： | 4-SOP（0.228"，5.80mm） |
| 供应商设备封装： | 4-SOP（2.54mm） |
| 包装： | 带卷 (TR) |
| 继电器类型： | 继电器 |
| 其它名称： | PS7200E-1AATR |
PS7200E-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
(3) Soldering by soldering iron
? Peak temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
(4) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10293EJ02V0DS
11
相关PDF资料 |
PDF描述 |
|---|---|
| PS7200B-1A-A | SSR OCMOS FET 250MA NO 4-SOP |
| TQ2SL-L-24V | RELAY TELECOM DPDT 2A 24V |
| G6Z-1F-TR DC9 | RELAY RF SPDT 10MA 9V |
| PS7142L-2A-E3-A | SSR OCMOS FET 200MA 2CH NO 8-SMD |
| G6Z-1F-TR DC5 | RELAY RF SPDT 10MA 5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS7200E-1A-E4 | 制造商:CEL 制造商全称:CEL 功能描述:4-PIN SOP, 0.8 ohm LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET |
| PS7200E-1A-E4-A | 制造商:CEL 制造商全称:CEL 功能描述:4-PIN SOP, 0.8 ohm LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET |
| PS7200E-1A-F3 | 功能描述:SSR OCMOS FET 250MA NO 4-SOP TR RoHS:否 类别:继电器 >> 固态 系列:PS, OCMOS 其它有关文件:AQx REACH Cert of Compliance 特色产品:AQY Series Relays 标准包装:1 系列:PhotoMOS™ AQY 电路:SPST-NO（1 Form A） 输出类型:AC，DC（RF） 导通状态电阻:1.25 欧姆 负载电流:250mA 输入电压:1.3VDC 电压 - 负载:0 ~ 40 V 安装类型:表面贴装 端接类型:SMD（SMT）接片 封装/外壳:4-SMD（0.175"，4.45mm） 供应商设备封装:4-SSOP 包装:Digi-Reel® 继电器类型:继电器 其它名称:255-2683-6 |
| PS7200E-1A-F3-A | 功能描述:固态继电器-PCB安装 1-Ch Normally Open RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| PS7200E-1A-F4 | 制造商:CEL 制造商全称:CEL 功能描述:4-PIN SOP, 0.8 ohm LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET |
发布紧急采购，3分钟左右您将得到回复。