参数资料
| 型号： | PS8101-V-K-A |
| 厂商： | CEL |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLR ANALOG HS OUT 5SO |
| 标准包装： | 20 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 3750Vrms |
| 电流传输比（最小值）： | 20% @ 16mA |
| 电流传输比（最大）： | 35% @ 16mA |
| 输出电压： | 35V |
| 电流 - 输出 / 通道： | 8mA |
| 电流 - DC 正向(If)： | 25mA |
| 输出类型： | 有 Vcc 的晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-SOIC（0.173"，4.40mm 宽，5 引线） |
| 包装： | 管件 |
PS8101
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260 ° C MAX.
220 ° C
to 60 s
180 ° C
120 ° C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
? Peak Temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 ° C
10
Data Sheet PN10260EJ06V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS8103-F3-A | OPTOISOLATOR ANALOG HS OUT 5S |
| PS8302L-E3-AX | PHOTOCOUPLER ANLG OUT 6DIP GULL |
| PS8501L1-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
| PS8502L1-V-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
| PS8601L-E3-A | PHOTOCOUPLR ANALOG HS OUT 8-S |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS8101-V-K-AX | 功能描述:高速光耦合器 Digital Fast OC COUPLR NL RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| PS-8102 | 制造商:Johnson Electric / Parlex Corporation 功能描述: |
| PS8103 | 制造商:California Eastern Laboratories (CEL) 功能描述:Optocoupler DC-IN 1-CH Transistor With Base DC-OUT 5-Pin SOP Tape |
| PS-8103 | 制造商:Johnson Electric / Parlex Corporation 功能描述: |
| PS8103-A | 功能描述:高速光耦合器 Hi-Speed Analog Out RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。