参数资料
| 型号： | PS8302L-E3-AX |
| 厂商： | CEL |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER ANLG OUT 6DIP GULL |
| 标准包装： | 2,000 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 15% @ 16mA |
| 输出电压： | 35V |
| 电流 - 输出 / 通道： | 8mA |
| 电流 - DC 正向(If)： | 25mA |
| 输出类型： | 有 Vcc 的晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-SOIC（0.268"，6.80mm 宽） |
| 包装： | 带卷 (TR) |
PS8302L,PS8302L2
<R>
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260 ° C MAX.
220 ° C
to 60 s
180 ° C
120 ° C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
? Peak temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
12
Data Sheet PN10688EJ05V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS8501L1-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
| PS8502L1-V-AX | PHOTOCOUPLER ANALOG HS OUT 8DIP |
| PS8601L-E3-A | PHOTOCOUPLR ANALOG HS OUT 8-S |
| PS8602L-F3-A | PHOTOCOUPLER ANLG HS OUT 8-SM |
| PS8802-2-F3-A | PHOTOCOUPLER 2-CHAN 1MBPS 8SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS83-100B | 制造商:ELECTROSWITCH ELECTRONIC PRODUCTS 功能描述:. |
| PS83-100G | 制造商:ELECTROSWITCH ELECTRONIC PRODUCTS 功能描述:. |
| PS8311QFN48GTR-A0 | 制造商:PARADE 功能描述:Dual mode display repeater with AUX CH and DDC combiner |
| PS83-121G | 功能描述:SWITCH PUSHBUTTON SPDT 5A 125V RoHS:是 类别:开关 >> 按钮 系列:PS 标准包装:1 系列:A16 类型:标准，发光式 电路:双刀双掷 开关功能:开-瞬时 额定电流:5A（AC） 额定电压 - AC:125V 额定电压 - DC:- 触动器类型:方形，按钮 颜色 - 致动器/盖:黄 发光类型，颜色:LED，黄 发光电压:12 VDC 安装类型:前面板安装 端接类型:焊接，快速连接 - 0.110"（2.8mm） 防护等级:IP65 - 防尘/防油/防水 特点:- 面板切口尺寸:圆形 - 直径 16.00mm 包装:散装 工作温度:-10°C ~ 55°C 机械寿命:2,000,000 次循环 电气寿命:100,000 次循环 其它名称:A165LAYM12D2 |
| PS8312QFN56GTR | 制造商:PARADE 功能描述:Dual mode source demultiplexer with DP DP and TMDS output |
发布紧急采购，3分钟左右您将得到回复。