参数资料
| 型号： | PS8601L-A |
| 厂商： | CEL |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLR ANALOG HS OUT 8-S |
| 产品目录绘图： | Dual Output Pin Out |
| 其它图纸： | PS8601L-A Circuit |
| 标准包装： | 50 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 15% @ 16mA |
| 输出电压： | 35V |
| 电流 - 输出 / 通道： | 8mA |
| 电流 - DC 正向(If)： | 25mA |
| 输出类型： | 有 Vcc 的晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SMD |
| 包装： | 管件 |
PS8601,PS8601L
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
10
Data Sheet PN10262EJ01V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS8602-A | PHOTOCOUPLER ANLG OUT HS 8-DI |
| PS8601-A | PHOTOCOUPLR ANALOG HS OUT 8-D |
| PS8103-A | OPTOISOLATOR ANALOG HS OUT 5S |
| PS8101-K-A | OPTOISOLATOR ANALOG HS OUT 5S |
| PS8101-F3-A | OPTOISOLATOR ANALOG HS OUT 5S |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS8601L-E3 | 制造商:Renesas Electronics Corporation 功能描述: |
| PS8601L-E3-A | 功能描述:PHOTOCOUPLR ANALOG HS OUT 8-S RoHS:是 类别:隔离器 >> 光隔离器 - 晶体管，光电输出 系列:NEPOC 标准包装:1,500 系列:NEPOC 通道数:1 输入类型:DC 电压 - 隔离:2500Vrms 电流传输比（最小值）:20% @ 16mA 电流传输比（最大）:- 输出电压:7V 电流 - 输出 / 通道:8mA 电流 - DC 正向(If):25mA Vce饱和（最大）:- 输出类型:有 Vcc 的晶体管 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) |
| PS8601L-E4 | 制造商:Renesas Electronics Corporation 功能描述: |
| PS8601L-V | 制造商:NEC 制造商全称:NEC 功能描述:HIGH SPEED ANALOG OUTPUT TYPE 8 PIN PHOTOCOUPLER |
| PS8601-V | 制造商:NEC 制造商全称:NEC 功能描述:HIGH SPEED ANALOG OUTPUT TYPE 8 PIN PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。