参数资料
| 型号： | PS8802-1-F4-AX |
| 厂商： | CEL |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER 1-CHAN 1MBPS 8-SOP |
| 标准包装： | 1,500 |
| 系列： | NEPOC |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 2500Vrms |
| 电流传输比（最小值）： | 15% @ 16mA |
| 电流传输比（最大）： | 45% @ 16mA |
| 输出电压： | 35V |
| 电流 - 输出 / 通道： | 8mA |
| 电流 - DC 正向(If)： | 25mA |
| 输出类型： | 有 Vcc 的晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 包装： | 带卷 (TR) |
PS8802-1,-2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
? Peak temperature (lead part temperature) 350 ° C or below
? Time (each pins)
? Flux
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 ° C.
12
Data Sheet PN10418EJ07V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS8502L3-E3-AX | PHOTOCOUPLER ANALOG HS OUT 8SMD |
| PS8502L2-E3-AX | PHOTOCOUPLER ANALOG HS OUT 8SMD |
| AWG28-10/F/300 | CABLE 10 COND 300' MULTI RIBBON |
| OCP-PCT4216/A | OPTOCOUPLER 4-CH AC-IN 16 DIP |
| PS2533L-1-K-A | PHOTOCOUPLER 1CH DARL 4-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS8802-1-V | 制造商:CEL 制造商全称:CEL 功能描述:1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER |
| PS8802-1-V-A | 制造商:CEL 制造商全称:CEL 功能描述:1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER |
| PS8802-1-V-F3 | 制造商:CEL 制造商全称:CEL 功能描述:1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER |
| PS8802-1-V-F3-A | 制造商:CEL 制造商全称:CEL 功能描述:1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER |
| PS8802-1-V-F4 | 制造商:CEL 制造商全称:CEL 功能描述:1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。