参数资料
| 型号： | PS9113-AX |
| 厂商： | CEL |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | ISOLATOR 1CH PUSH-PULL OUT 5SOP |
| 产品目录绘图： | High Speed Pin Out |
| 标准包装： | 20 |
| 系列： | NEPOC |
| 电压 - 隔离： | 3750Vrms |
| 通道数： | 1，单向 |
| 电流 - 输出 / 通道： | 15mA |
| 数据速率： | 1Mbps |
| 传输延迟高 - 低 @ 如果： | 250ns @ 10mA |
| 电流 - DC 正向(If)： | 25mA |
| 输入类型： | DC |
| 输出类型： | 开路集电极 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-SOIC（0.173"，4.40mm 宽，5 引线） |
| 供应商设备封装： | 5-SOP |
| 包装： | 散装 |
| 产品目录页面： | 2754 (CN2011-ZH PDF) |
PS9113
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
? Peak reflow temperature
? Time of peak reflow temperature
? Time of temperature higher than 220 ° C
? Time to preheat temperature from 120 to 180 ° C
? Number of reflows
? Flux
260 ° C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 ± 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260?C MAX.
220?C
to 60 s
180?C
120?C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
? Temperature
? Time
? Preheating conditions
? Number of times
? Flux
260 ° C or below (molten solder temperature)
10 seconds or less
120 ° C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
? Peak Temperature (lead part temperature)
? Time (each pins)
? Flux
350 ° C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 ° C
12
Data Sheet PN10265EJ05V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| PS9117A-V-AX | PHOTOCOUPLER HS OUT 5-SOP |
| PS9121-V-F3-AX | ISOLATOR 3.75KVRMS 1CH OPEN 5SOP |
| PS9122-F3-L-AX | PHOTOCOUPLER HS OUT 5-SOP |
| PS9123-AX | ISOLAT 3.75KVRMS 1CH UNIDIR 5SOP |
| PS9151-AX | PHOTOCOUPLER DGTL CMOS OUT 5SOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS9-113B | 制造商:ELECTROSWITCH ELECTRONIC PRODUCTS 功能描述:PS9-113B |
| PS9113-F3 | 制造商:California Eastern Laboratories (CEL) 功能描述:Optocoupler Logic-Out Open Collector DC-IN 1-CH 5-Pin SOP T/R |
| PS9113-F3-A | 功能描述:高速光耦合器 1Mbps Open Collector RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| PS9113-F3-AX | 功能描述:高速光耦合器 Digital Fast HI V Couplr NL RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| PS9113-F4 | 制造商:NEC 制造商全称:NEC 功能描述:1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。