- 您现在的位置：买卖IC网 > PDF目录224796 > PS9213-V-F3-AX 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps PDF资料下载
参数资料
| 型号： | PS9213-V-F3-AX |
| 元件分类： | 光电耦合器 |
| 英文描述： | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps |
| 封装： | LEAD FREE, PLASTIC, SOP-5 |
| 文件页数： | 6/18页 |
| 文件大小： | 274K |
| 代理商： | PS9213-V-F3-AX |
Data Sheet PN10535EJ04V0DS
12
PS9213
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature
260
°C or below (package surface temperature)
Time of peak reflow temperature
10 seconds or less
Time of temperature higher than 220
°C
60 seconds or less
Time to preheat temperature from 120 to 180
°C
120
±30 s
Number of reflows
Three
Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220C
180C
Package
Surface
Temperature
T
(C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260C MAX.
120C
(2) Wave soldering
Temperature
260
°C or below (molten solder temperature)
Time
10 seconds or less
Preheating conditions
120
°C or below (package surface temperature)
Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
Peak Temperature (lead part temperature)
350
°C or below
Time (each pins)
3 seconds or less
Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100
°C
相关PDF资料 |
PDF描述 |
|---|---|
| PS9817-1-V-F3 | NECs HIGH CMR, 10Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER |
| PS9817-1-V-F4 | Power Resistor; Series:MK; Resistance:10ohm; Resistance Tolerance:+/- 1 %; Power Rating:0.75W; Voltage Rating:400V; Temperature Coefficient:+/-50 ppm; Mounting Type:Through Hole; Operating Temp. Min:0 C; Terminal Type:Radial Leaded |
| PSB3AC | VCO |
| PSCIA2CHP-1 | P-CHANNEL, Si, SMALL SIGNAL, JFET |
| PSD2-24 | POWER TRANSFORMER, 1.1 VA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS9213-V-F4 | 制造商:CEL 制造商全称:CEL 功能描述:PHOTOCOUPLER |
| PS9213-V-F4-A | 制造商:CEL 制造商全称:CEL 功能描述:PHOTOCOUPLER |
| PS9214 | 制造商:CEL 制造商全称:CEL 功能描述:HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 5.5 mm |
| PS9214(AX) | 制造商:Renesas Electronics Corporation 功能描述: |
| PS9214-A | 功能描述:PHOTOCOUPLER HS DGTL OC OUT 5 RoHS:是 类别:隔离器 >> 光隔离器 - 逻辑输出 系列:NEPOC 标准包装:1,000 系列:- 电压 - 隔离:7500Vrms 通道数:1，单向 电流 - 输出 / 通道:50mA 数据速率:5MHz 传输延迟高 - 低 @ 如果:100ns 电流 - DC 正向(If):5mA 输入类型:DC 输出类型:开路集电极 安装类型:表面贴装 封装/外壳:6-SMD 供应商设备封装:6-SMD 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。