参数资料
| 型号： | PS9505L2-E3-AX |
| 厂商： | CEL |
| 文件页数： | 18/22页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER IN 8-SMD |
| 标准包装： | 1,000 |
| 系列： | NEPOC |
| 电压 - 隔离： | 5000Vrms |
| 通道数： | 1，单向 |
| 电流 - 输出 / 通道： | 2A |
| 传输延迟高 - 低 @ 如果： | 180ns @ 10mA |
| 电流 - DC 正向(If)： | 16mA |
| 输入类型： | DC |
| 输出类型： | 栅极驱动器 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-BESOP（0.256"，6.50mm 宽） |
| 供应商设备封装： | 8-SDIP 鸥翼型 |
| 包装： | 带卷 (TR) |
A Business Partner of Renesas Electronics Corporation.
PS9505,PS9505L1,PS9505L2,PS9505L3
Chapter Title
(4) Cautions
? Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. Board designing
(1) By-pass capacitor of more than 0.1 μ F is used between V CC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
<R>
(2) When designing the printed wiring board, ensure that the pattern of the IGBT collectors/emitters is not too close
to the input block pattern of the photocoupler.
If the pattern is too close to the input block and coupling occurs, a sudden fluctuation in the voltage on the IGBT
output side might affect the photocoupler’s LED input, leading to malfunction or degradation of characteristics.
(If the pattern needs to be close to the input block, to prevent the LED from lighting during the off state due to
the abovementioned coupling, design the input-side circuit so that the bias of the LED is reversed, within the
range of the recommended operating conditions, and be sure to thoroughly evaluate operation.)
(3) Pins 1, 4 (which is an NC *1 pin) can either be connected directly to the GND pin on the LED side or left open.
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may
degrade the internal noise environment of the device.
*1 NC: Non-Connection (No Connection)
3. Make sure the rise/fall time of the forward current is 0.5 μ s or less.
4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/ μ s or less.
5. Avoid storage at a high temperature and high humidity.
R 0 8 D S 0 0 1 5 E J 0 1 0 0 R e v . 1 . 0 0
Jan 06, 2012
P a g e 1 8 o f 2 0
相关PDF资料 |
PDF描述 |
|---|---|
| PS9506L3-V-E3-AX | PHOTOCOUPLER IN 8-SMD |
| PS9513-AX | PHOTOCOUPLER IPM GATE DVR 8DIP |
| PS9551L4-AX | ISOLATOR AMP DGTL 5KRMS 8MD |
| PS9552L1-AX | PHOTOCOUPLER IGBT GATE DRV 8-DIP |
| PS9587L2-E3-AX | ISOL 5KVRMS 1CH OPEN COL 8DIP GW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS9505L3-AX | 功能描述:高速光耦合器 15-30Volts 10mA -40C +110C High CMR RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| PS9505L3-E3-AX | 功能描述:高速光耦合器 15-30Volts 10mA -40C +110C High CMR RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| PS9505-V-AX | 功能描述:PHOTOCOUPLER IGBT GATE DVR 8DIP RoHS:是 类别:隔离器 >> 光隔离器 - 逻辑输出 系列:NEPOC 标准包装:50 系列:- 电压 - 隔离:3750Vrms 通道数:1，单向 电流 - 输出 / 通道:10mA 数据速率:25MBd 传输延迟高 - 低 @ 如果:20ns 电流 - DC 正向(If):- 输入类型:逻辑 输出类型:推挽式/图腾柱 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-DIP 包装:管件 其它名称:516-1112-5 |
| PS9506 | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:0.6 A OUTPUT CURRENT, HIGH CMR, IGBT GATE DRIVE, 8-PIN DIP PHOTOCOUPLER |
| PS9506-AX | 功能描述:PHOTOCOUPLER IGBT GATE DVR 8DIP RoHS:是 类别:隔离器 >> 光隔离器 - 逻辑输出 系列:NEPOC 标准包装:50 系列:- 电压 - 隔离:3750Vrms 通道数:1，单向 电流 - 输出 / 通道:10mA 数据速率:25MBd 传输延迟高 - 低 @ 如果:20ns 电流 - DC 正向(If):- 输入类型:逻辑 输出类型:推挽式/图腾柱 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-DIP 包装:管件 其它名称:516-1112-5 |
发布紧急采购，3分钟左右您将得到回复。