参数资料
型号: PSA153-2
元件分类: 电源模块
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
封装: METAL, CASE A01, MODULE
文件页数: 6/10页
文件大小: 411K
代理商: PSA153-2
Chassis Mountable
Switching Regulators
PSA Series
Edition 5/5.2000
5/10
Thermal Considerations
When a switching regulator is located in free, quasi-sta-
tionary air (convection cooling) at a temperature
TA = 50
°C
and is operated at its nominal output current
Io nom, the
case temperature
TC will be about 80
°C after the warm-up
phase, measured at the
Measuring point of case tempera-
ture TC (see: Mechanical Data).
Under practical operating conditions, the ambient tem-
perature
TA may exceed 50
°C, provided additional meas-
ures (heat sink, fan, etc.) are taken to ensure that the case
temperature
TC does not exceed its maximum value of
80
°C.
Example: Sufficient forced cooling allows
TA max = 65°C. A
simple check of the case temperature
TC (TC ≤ 80°C) at full
load ensures correct operation of the system.
1.2
1.0
0.8
0.6
0.4
0
0.2
0.4
1.0
1.2
0.2
0.6
0.8
1.4
Uo/Uo nom
Io/Io nom
I o
nom
Io L
05033
Fig. 5
Overload, short-circuit behaviour Uo versus Io.
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
40
60
70
80
Io/Io nom
TA [°C]
0.9
1.0
Forced cooling
05032
TC max
50
Convection cooling
TA min
Parallel and Series Connection
Outputs of equal nominal voltages can be parallel-con-
nected. However, the use of a single unit with higher out-
put power, because of its power dissipation, is always a
better solution.
In parallel-connected operation, one or several outputs
may operate continuously at their current limit knee-point
which will cause an increase of the heat generation. Con-
sequently, the max. ambient temperature value should be
reduced by 10 K.
Outputs can be series-connected with any other module.
In series-connection the maximum output current is limited
by the lowest current limitation. Electrically separated
source voltages are needed for each module!
Short Circuit Behaviour
A constant current limitation circuit holds the output cur-
rent almost constant whenever an overload or a short cir-
cuit is applied to the regulator's output. It acts self-protect-
ing and recovers – in contrary to the fold back method –
automatically after removal of the overload or short circuit
condition.
Fig. 4
Output current derating versus temperature
Output Protection
A voltage suppressor diode which in worst case conditions
fails into a short circuit, protects the output against an in-
ternally generated overvoltage. Such an overvoltage could
occur due to a failure of either the control circuit or the
switching transistor. The output protection is not designed
to withstand externally applied overvoltages. The user
should ensure that systems with Power-One power
supplies, in the event of a failure, do not result in an unsafe
condition (fail-safe).
相关PDF资料
PDF描述
PSA123-2IRY 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSB365-7IRC 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSB245-9IRC 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSB125-9IRC 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSB365-7LIR 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PSA1554-605 功能描述:CHASSIS RACK POWER SUPPLY RoHS:是 类别:电源 - 外部/内部(非板载) >> 配件 系列:- 标准包装:1 系列:VS/MP 附件类型:连接器套件 适用于相关产品:-
PSA1554-605Chassis-R 功能描述:线性和开关式电源 19in Rack at 1U High For PSM500 PS RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
PSA15A-050P 功能描述:ADAPTER WALL 15W 5V US RoHS:是 类别:电源 - 外部/内部(非板载) >> AC DC 桌面、壁式变压器 系列:PSA15A 标准包装:40 系列:- 局部使用:适用于北美地区 形态:壁式(2 管脚) 输入电压:120VAC 电压 - 每连接器输出:5V 电流 - 输出(最大):600mA 功率(瓦特):3W 电源类型:线性(非稳压) 电极标记:负极中心 缆线插头:2.1mm 内径 x 5.5mm 外径 x 9.5mm 母形 应用:商用 特点:- 效率:- 工作温度:- AC 输入连接器:- 线缆长度:- 线路调节:- 负载调整:- 重量:- 相关产品:CP-2225-ND - CORD YE-2013 GATOR CLIP SPT 1' 其它名称:Q1710420
PSA15A-050P-R 功能描述:插入式交流适配器 15W 5V 3A RoHS:否 制造商:Phihong 地区:Universal 安装风格:Wall, Interchangeable Plug 输入电压范围:90 VAC to 264 VAC 输出端数量:1 输出功率额定值:5 W 输出电压(通道 1):5 V 输出电流(通道 1):1 A 直流输出连接器:USB Type A 随附/必需的交流插头:Required 商用/医用:Commercial 效率:Level V
PSA15A-050PV-R 功能描述:插入式交流适配器 15W 5V 3A Wall Mount - US RoHS:否 制造商:Phihong 地区:Universal 安装风格:Wall, Interchangeable Plug 输入电压范围:90 VAC to 264 VAC 输出端数量:1 输出功率额定值:5 W 输出电压(通道 1):5 V 输出电流(通道 1):1 A 直流输出连接器:USB Type A 随附/必需的交流插头:Required 商用/医用:Commercial 效率:Level V