- 您现在的位置：买卖IC网 > PDF目录69113 > PSB483-7IP (POWER-ONE INC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PSB483-7IP |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 3/13页 |
| 文件大小： | 221K |
| 代理商： | PSB483-7IP |
PSB Series Extended Data Sheet
Positive Switching Regulators (Rugged)
REV. OCT 17, 2003
Page 11 of 13
Table 9: Insulation concept leading to an SELV output circuit
Conditions Front end
Switching regulator
Result
Supply
Minimum required grade
Maximum
Minimum required safety
Measures to achieve the
Safety status of
voltage
of isolation, to be provided DC output
status of the front end
specified safety status of the
the switching
by the AC-DC front end,
voltage
output circuit
regulator output
including mains supplied
from the
circuit
battery charger
front end 1
Battery
Double or Reinforced
≤60 V
SELV circuit
None
SELV circuit
supply,
>60 V
Earthed hazardous voltage Input fuse 3 and non
Earthed SELV
considered
secondary circuit 2
accessible case 5
circuit
as secon-
Unearthed hazardous
Input fuse 3 and unearthed,
Unearthed SELV
dary circuit
voltage secondary circuit 5
non accessible case 5
circuit
Hazardous voltage
Input fuse 3 and earthed output Earthed SELV
secondary circuit
circuit 4 and non accessible
circuit
case 5
Mains
Basic
≤60 V
Earthed SELV circuit 4
None
-250 V AC
ELV circuit
Input fuse 3 and earthed output
>60 V
Hazardous voltage
circuit 4 and non accessible
secondary circuit
case 5
Double or reinforced
≤60 V
SELV circuit
None
SELV circuit
>60 V
Double or reinforced insu-
Input fuse 3 and unearthed
Unearthed SELV
lated unearthed hazardous and non accessible case 5
circuit
voltage secondary circuit 5
1 The front end output voltage should match the specified input voltage range of the switching regulator.
2 The conductor to the Gi– terminal of the switching regulator has to be connected to earth by the installer according to the relevant
safety standard, e.g. IEC/EN 60950.
3 The installer shall provide an approved fuse (slow blow type with the lowest current rating suitable for the application, max. 12.5 A)
in a non-earthed input conductor directly at the input of the switching regulator. If Vo+ is earthed, insert the fuse in the Gi- line. For
UL’s purpose, the fuse needs to be UL-listed. If option C is fitted, a suitable fuse is already built-in in the Vi+ line.
4 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
5 Has to be insulated from earth by double or reinforced insulation according to the relevant safety standard, based on the maximum
output voltage from the front end.
Safety of Operator Accessible Output Circuit
If the output circuit of a switching regulator is operator-ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
The following table shows some possible installation con-
figurations, compliance with which causes the output cir-
cuit of the switching regulator to be an SELV circuit ac-
cording to IEC/EN 60950 up to a nominal output voltage of
30 V, or 48 V if option C is fitted.
However, it is the sole responsibility of the installer or user
to assure the compliance with the relevant and applicable
safety regulations.
More information is given in
Technical Information: Safety
& EMC.
The switching regulators are subject to manufacturing
surveillance in accordance with the above mentioned UL
and CSA and with ISO 9001 standards.
Isolation
Electric strength test voltage between input intercon-
nected with output and case: 1500 VDC, 1 s.
This test is performed as factory test in accordance with
IEC/EN 60950 and UL 1950 and should not be repeated in
the field. Power-One will not honour any guarantee claims
resulting from electric strength field tests.
相关PDF资料 |
PDF描述 |
|---|---|
| PSB483-7LIRC | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSB153-7IR | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSB243-7LIPC | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSB363-9LIRC | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSB483-9LIRC | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSB483-7IR | 功能描述:SWITCHING REGULATOR 144W 48V RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:* 标准包装:5 系列:* |
| PSB483-9IR | 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 48V 4A 192W 7PIN - Bulk |
| PSB4851 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Front End for Sophisticated Answering Machine |
| PSB4851TV2.1 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| PSB-486 | 制造商:PMI 制造商全称:PMI 功能描述:SPLIT BOBBIN HIGH ISOLATION POWER TRANSFORMERS |
发布紧急采购，3分钟左右您将得到回复。