参数资料
型号: PSC159-2IR
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
文件页数: 11/12页
文件大小: 198K
代理商: PSC159-2IR
PSC Series Extended Data Sheet
Positive Switching Regulators (Benign)
REV. MAY 12, 2004
Page 8 of 12
Standards and Approvals
All switching regulators are UL recognized according to UL
1950, UL 1012 and EN 60950, UL recognized for Canada to
CAN/CSA C22.2 No. 234-M90.
The units have been evaluated for:
Building in,
Operational insulation from input to output and input/out-
put to case,
The use in an overvoltage category II environment,
The use in a pollution degree 2 environment.
The switching regulators are subject to manufacturing sur-
veillance in accordance with the above mentioned UL and
CSA and with ISO 9001 standards.
Isolation
Electric strength test voltage between input interconnected
with output against case: 500 VDC, 1 s.
This test is performed in the factory as routine test in ac-
cordance with EN50116, IEC/EN 60950 and UL 1950 and
should not be repeated in the field. Power-One will not
honour any guarantee claims resulting from electric
strength field tests.
Safety and Installation Instructions
Installation Instruction
Installation of the switching regulators must strictly follow
the national safety regulations in compliance with the enclo-
sure, mounting, creepage, clearance, casualty, markings
and segregation requirements of the end-use application.
Check for hazardous voltages before altering any connec-
tions. Connections can be made using fast-on or soldering
technique.
The input and the output circuit are not separated, i.e. the
negative path is internally interconnected!
The units should be connected to a secondary circuit.
Do not open the module.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also:
Safety
of operator accessible output circuit.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids is to be prevented, since the power supplies
are not hermetically sealed.
Protection Degree
The protection degree is IP 20.
Safety of Operator Accessible Output Circuit
If the output circuit of a switching regulator is operator-ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
The following table shows some possible installation con-
figurations, compliance with which causes the output circuit
of the switching regulator to be an SELV circuit according to
IEC/EN 60950 up to a nominal output voltage of 30 V.
However, it is the sole responsibility of the installer or user
to assure the compliance with the relevant and applicable
safety regulations.
More information is given in:
Technical Information: Safety
& EMC.
相关PDF资料
PDF描述
PT4567N 1-OUTPUT 14.4 W DC-DC REG PWR SUPPLY MODULE
PT4585N 1-OUTPUT 14.4 W DC-DC REG PWR SUPPLY MODULE
PT4585A 1-OUTPUT 14.4 W DC-DC REG PWR SUPPLY MODULE
PT4661N 2-OUTPUT 25 W DC-DC REG PWR SUPPLY MODULE
PT4663A 2-OUTPUT 25 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PSC-15A-050 功能描述:插入式交流适配器 U 552-PSC-15A-050S 15W 5VDC WALL ADAPT RoHS:否 制造商:Phihong 地区:Universal 安装风格:Wall, Interchangeable Plug 输入电压范围:90 VAC to 264 VAC 输出端数量:1 输出功率额定值:5 W 输出电压(通道 1):5 V 输出电流(通道 1):1 A 直流输出连接器:USB Type A 随附/必需的交流插头:Required 商用/医用:Commercial 效率:Level V
PSC15A-050 功能描述:5V 15W AC/DC External Wall Mount Adapter Fixed Blade Input 制造商:phihong usa 系列:PSC15A 零件状态:有效 使用地区:适用于北美地区 形式:壁式安装 输入类型:固定插片 电压 - 输入:90 ~ 264 VAC 电压 - 输出:5V 电流 - 输出(最大值):3A 功率(W):15W 空载功耗:100mW(最大) 极化:正极中心 应用:ITE(商业) 效率:VI 级 工作温度:0°C ~ 40°C 输出连接器:圆管插头,2.1mm 内径 x 5.5mm 外径 x 10.0mm 大小/尺寸:2.81" 长 x 1.97" 宽 x 1.23" 高(71.5mm x 50.0mm x 31.2mm) 认可:cULus 功率(W) - 最大值:15W 输入连接器:NEMA 1-15P 电线长度:59"(1.50m) 重量:0.32 磅(145.15g) 标准包装:1
PSC-15A-050S 功能描述:插入式交流适配器 15W 5VDC WALL ADAPT RoHS:否 制造商:Phihong 地区:Universal 安装风格:Wall, Interchangeable Plug 输入电压范围:90 VAC to 264 VAC 输出端数量:1 输出功率额定值:5 W 输出电压(通道 1):5 V 输出电流(通道 1):1 A 直流输出连接器:USB Type A 随附/必需的交流插头:Required 商用/医用:Commercial 效率:Level V
PSC15A-050S 制造商:PHIHONG 制造商全称:PHIHONG 功能描述:15 Watt - Low Cost Linear Eliminator
PSC15A-050S-R 功能描述:插入式交流适配器 15W 5VDC WALL ADAPT RoHS:否 制造商:Phihong 地区:Universal 安装风格:Wall, Interchangeable Plug 输入电压范围:90 VAC to 264 VAC 输出端数量:1 输出功率额定值:5 W 输出电压(通道 1):5 V 输出电流(通道 1):1 A 直流输出连接器:USB Type A 随附/必需的交流插头:Required 商用/医用:Commercial 效率:Level V