- 您现在的位置：买卖IC网 > PDF目录190253 > PSD6407 (Electronic Theatre Controls, Inc.) POSITION SENSITIVE DETECTOR PDF资料下载
参数资料
| 型号： | PSD6407 |
| 厂商： | Electronic Theatre Controls, Inc. |
| 英文描述： | POSITION SENSITIVE DETECTOR |
| 中文描述： | 位置灵敏探测器 |
| 文件页数： | 5/16页 |
| 文件大小： | 1289K |
| 代理商： | PSD6407 |
10
Figure 6-1 Response wavelength example of PSD
KPSDC0078EB
2) Diffusion time t2 of carriers generated outside the deple-
tion layer
Carriers are also generated outside the depletion layer
when light is absorbed in the PSD chip surrounding areas
outside the active area or at locations deeper than the de-
pletion layer in the substrate. These carriers diffuse through
the substrate and are extracted as an output. The time t2
required for these carriers to diffuse may be more than sev-
eral microseconds.
The equation below gives the approximate rise time tr of a
PSD. Figure 6-1 shows typical output waveforms in re-
sponse to stepped light input.
Figure 6-2 shows the relation between the rise time and re-
verse voltage measured at different wavelengths. The rise
time can be reduced by increasing the reverse voltage and
using a light beam of shorter wavelengths. Selecting a PSD
with a small Rie is also effective in improving the rise time.
A method for integrating position signals can be used when
detecting pulsed light having a pulse width shorter than the
PSD rise time.
Characteristic and use
6. Response speed
As with photodiodes, the response speed of PSD is the
time required for the generated carriers to be extracted as
current by an external circuit. This is generally expressed
as the rise time tr and is an important parameter when de-
tecting a spot light traveling over the active surface at high
speeds or using pulse-modulated light for subtracting the
background light. The rise time is defined as the time need-
ed for the output signal to rise from 10 to 90 % of its peak
value and is chiefly determined by the following two factors.
1) Time constant t1 determined by the interelectrode resist-
ance, load resistance and terminal capacitance
The interelectrode resistance Rie of PSD basically acts as
load resistance RL, so the time constant t1 is given by the
interelectrode resistance Rie and terminal capacitance Ct,
as follows:
The rise time listed in our PSD datasheets is measured
with a spot light striking the center of the active area with
the interelectrode resistance Rie distributed between the
electrodes. So the time constant t1 is as follows:
t1 = 2.2 . Ct . (Rie + RL) ......... (6-1)
t1 = 0.5 . Ct . (Rie + RL) ......... (6-2)
Figure 6-2 Rise time vs. reverse voltage (S4583-06)
KPSDB0110EA
REVERSE VOLTAGE (V)
(Typ. Ta=25 C)
RISE
TIME
(s)
1
0.1
0
10
8
6
4
2
10
100
l=890 nm
l=650 nm
t12 + t22 .................... (6-3)
tr
LIGHT INPUT
OUTPUT WAVEFORM
(t1>>t2)
OUTPUT WAVEFORM
(t2>>t1)
相关PDF资料 |
PDF描述 |
|---|---|
| PSD813F2-15JT | 128K X 8 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQCC52 |
| PSD813F5V-20MT | 128K X 8 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQFP52 |
| PSD853F2-15JIT | 128K X 8 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQCC52 |
| PSD833F2-15M | 1M X 1 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQFP52 |
| PSD835G2V-B-90MI | Configurable Memory System on a Chip for 8-Bit Microcontrollers |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSD6481212 | 制造商:TDK-Lambda Corporation 功能描述:DC/DC,DUAL-OUT,12/-12V,0.25/-0.25A,6W - Bulk |
| PSD6-48-1212 | 功能描述:DC/DC转换器 6W 12V 0.25A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PSD6481212/S | 制造商:TDK-Lambda Corporation 功能描述:DC/DC,DUAL-OUT,12/-12V,0.25/-0.25A,6W - Bulk |
| PSD6-48-1212/S | 功能描述:DC/DC转换器 6W 12V 0.25A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PSD6-48-1212-HFP | 制造商:TDK-Lambda Corporation 功能描述:6W,36-76VDC,+/-12V@0.25A,1.12" X 0.8" X 0.31", HAZMAT - Bulk |
发布紧急采购，3分钟左右您将得到回复。