- 您现在的位置：买卖IC网 > Datasheet目录500 > PSE543-R04 (SMC Corporation of America)SENSOR PRESSURE 100KPA 4MM REDUC Datasheet资料下载
参数资料
| 型号： | PSE543-R04 |
| 厂商： | SMC Corporation of America |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | SENSOR PRESSURE 100KPA 4MM REDUC |
| 标准包装： | 1 |
| 系列： | PSE540 |
| 压力类型： | 真空 |
| 工作压力： | ±14.65 PSI，±101 kPa |
| 端口尺寸： | 母型，0.8"（20.32mm）NPT |
| 输出： | 数字 |
| 电源电压： | 12 V ~ 24 V |
| 端接类型： | 带连接器的缆线 |
| 工作温度： | 0°C ~ 50°C |
| 封装/外壳： | 不锈钢 |
| 产品目录页面： | 2804 (CN2011-ZH PDF) |
| 其它名称： | 606-1022 |
Series PSE
Specific Product Precautions 1
Be sure to read before handling.
{ Pressure Sensor
Handling
Air Supply
SE3
Warning
1. Do not drop, bump, or apply excessive impact
(PSE540: 980 m/s 2 , PSE560: 500 m/s 2 ) while han-
dling. Although the body of the sensor may not be
damaged, the inside of the sensor could be damaged
and lead to malfunction.
2. The tensile strength of the cord is 50 N. Applying a
greater pulling force to it can cause malfunction.
Warning
1. Use of toxic, corrosive or flammable gases
Since the switch uses stainless steel 316L as the material of the
pressure sensor and fittings, do not use toxic or corrosive
gases.
2. Fluid compatibility
Since the switch uses stainless steel 316L as the wetted
ZSE ?
ISE ?
PSE
Z
I
PS
When handling, hold the body of the sensor—do not
dangle it from the cord.
material (for the pressure sensor and fittings), use fluids that will
not corrode this material.
Z
I
SE 12
4. Connection of sensor connector Sheath
3. Do not use pressure sensors with corrosive and/or
flammable gases or liquids.
20 mm or more
? Cut the sensor cable as illustrated to the right.
? Referring to the table below, insert each
lead wire of the cable at the position Insulator
marked with a number corresponding to the color of the lead wire.
(For the corrosiveness of the fluids, please consult with the
manufacturers of the respective fluids.)
Helium leakage test
Helium leakage test is conducted on the welded parts. Use ferrules
by Crawford Fittings (Swagelok ? fittings) as TSJ fittings, seals and
glands by Cajon (VCR ? fittings) as URJ fittings. If ferrules, seals, or
ZSP
ISA2
IS ?
ZSM
Connector
no.
1
2
3
4
Wire core color
For PSE200 (ZS-26-E) For PSE300 (ZS-28-C)
Brown (DC (+)) Brown (DC (+))
Black (OUT: 1 to 5 V) Not connected
Blue (DC (-)) Blue (DC (-))
Not connected Black (OUT: 1 to 5 V)
glands of other brands are to be used, be sure to conduct helium
leakage test before using those products.
{ Controller
PF2 ?
IF ?
Data
? Confirm that the numbers on the
connector match the colors of the
wires and that the wires are inserted to the
Part-A
Warning
Handling
bottom. Press Part A by hand for
temporary fixing.
? Press in the central part of Part A vertically with
a tool such as pliers.
? A sensor connector cannot
be taken apart for reuse
once it is crimped. If the wire
arrangement is incorrect or
if the wire insertion fails, use a new sensor connector.
? For connection to SMC Series PSE300 pressure switches, use
sensor connectors (ZS-28-C) or e-con connectors listed below.
1. Do not drop, bump, or apply excessive impact
(100 m/s 2 ) while handling. Although the body of the
controller case may not be damaged, the inside of
the controller could be damaged and cause
malfunction.
2. The tensile strength of the power supply/output
connection cable is 50 N; that of the pressure sensor
lead wire with connector is 25 N. Applying a greater
pulling force than the applicable specified tensile
strength to either of these components can lead to
malfunction. When handling, hold the body of the
controller—do not dangle it from the cord.
Manufacturer
Part no.
Sumitomo 3M
Tyco Electronics AMP
37104-3101-000FL
1-1473562-4
Connection
? For detailed information about e-con connectors, please
consult the manufacturers of the respective connectors.
Operating Environment
Warning
1. The pressure sensors are CE marked; however, they
are not equipped with surge protection against
lightning. Lightning surge countermeasures should
be applied directly to system components as
necessary.
2. The pressure sensors do not have an explosion
proof rating. Never use pressure sensors in the
presence of flammable or explosive gases.
Warning
1. Incorrect wiring can damage the switch and cause
malfunction or erroneous switch output. Connections
should be done while the power is turned off.
2. Do not attempt to insert or pull out the pressure
sensor or its connector when the power is on. Switch
output may malfunction.
3. Wire separately from power lines and high voltage
lines, avoiding wiring in the same conduit with these
lines. Malfunctions may occur due to noise from these
other lines.
4. If a commercial switching regulator is used, make
sure that the F.G. terminal is grounded.
16-3-29
相关PDF资料 |
PDF描述 |
|---|---|
| PT-54-RA-C21-MPE | BIG CHIP LED HB MODULE RED |
| PT100MC0MP1 | PHOTOTRANSISTOR CLEAR LENS SMD |
| PT100MF0MP1 | PHOTO TRANS BLACK LENS 910NM SMD |
| PT100MF1MP1 | PHOTOTRANS DARL OUT CLEAR SMD |
| PT103G2 | THERMISTOR 10K OHM +/-0.20C |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSE550 | 制造商:SMC 功能描述:Bulk 制造商:SMC 功能描述:Low diff pressure sensor 1 to 5 V output |
| PSE550-28 | 制造商:SMC 功能描述:Low diff pressure sensor 4 to 20 mA out |
| PSE550-AC2 | 制造商:SMC Corporation of America 功能描述:PRESSURE SENSOR,L/DIFFERENTIAL 制造商:SMC 功能描述:SMC PSE550 Differential Pressure Sensor |
| PSE560-01 | 制造商:SMC Corporation of America 功能描述:SENSOR, GENERAL FLUID SWITCH 制造商:SMC 功能描述:Pressure Sensor gen fluids 1/8 1MPa V |
| PSE560-01-28 | 制造商:SMC 功能描述:Bulk |
发布紧急采购，3分钟左右您将得到回复。