- 您现在的位置：买卖IC网 > PDF目录69136 > PSR152.5-7-7PY (POWER-ONE INC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PSR152.5-7-7PY |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 11/11页 |
| 文件大小： | 652K |
| 代理商： | PSR152.5-7-7PY |
Industrial Environment
Switching Regulators, PCB & Chassis
PSR Series
Edition 4/4.99
9/11
MELCHER
The Power Partners.
Table 8: Insulation concept leading to an SELV output circuit
Conditions
Front end
Switching regulator
Result
Supply
Minimum required grade
Maximum
Minimum required safety
Measures to achieve the
Safety status of
voltage
of isolation, to be provided DC output
status of the front end
specified safety status of the
the switching
by the AC-DC front end,
voltage
output circuit
regulator output
including mains supplied
from the
circuit
battery charger
front end 1
Battery
Double or Reinforced
≤60 V
SELV circuit
None
SELV circuit
supply,
>60 V
Earthed hazardous voltage Input fuse 3 and earthed 4
Earthed SELV
considered
secondary circuit 2
or non accessible case 5
circuit
as secon-
Unearthed hazardous
Input fuse 3 and unearthed,
Unearthed SELV
dary circuit
voltage secondary circuit 5
non accessible case 5
circuit
Hazardous voltage
Input fuse 3 and earthed output Earthed SELV
secondary circuit
circuit 4 and earthed 4 or non
circuit
accessible case 5
Mains
Basic
≤60 V
Earthed SELV circuit 4
None
≤250 V AC
ELV circuit
Input fuse 3 and earthed output
>60 V
Hazardous voltage
circuit 4 and earthed 4 or non
secondary circuit
accessible case 5
Double or reinforced
≤60 V
SELV circuit
None
SELV circuit
>60 V
Double or reinforced insu-
Input fuse 3 and unearthed
Unearthed SELV
lated unearthed hazardous and non accessible case 5
circuit
voltage secondary circuit 5
1 The front end output voltage should match the specified input voltage range of the switching regulator.
2 The conductor to the Gi– terminal of the switching regulator has to be connected to earth by the installer according to the relevant
safety standard, e.g. IEC/EN 60950.
3 The installer shall provide an approved fuse (slow blow type with the lowest current rating suitable for the application, max. 12.5 A)
in a non-earthed input conductor directly at the input of the switching regulator. If Vo+ is earthed, insert the fuse in the Gi- line. For
UL’s purpose, the fuse needs to be UL-listed. If option C is fitted, a suitable fuse is already built-in in the Vi+ line.
4 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
5 Has to be insulated from earth by double or reinforced insulation according to the relevant safety standard, based on the maximum
output voltage from the front end.
Safety of Operator Accessible Output Circuit
If the output circuit of a switching regulator is operator-ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
The following table shows some possible installation con-
figurations, compliance with which causes the output cir-
cuit of the switching regulator to be an SELV circuit ac-
cording to IEC/EN 60950 up to a nominal output voltage of
30 V.
However, it is the sole responsibility of the installer or user
to assure the compliance with the relevant and applicable
safety regulations.
More information is given in:
Technical Information: Safety
& EMC.
Standards and Approvals
All switching regulators are UL recognized according to UL
1950, UL 1012 and EN 60950, UL recognized for Canada
to CAN/CSA C22.2 No. 234-M90 and SEV approved to
IEC/EN 60950 and EN 55014 standards.
The units have been evaluated for:
Building in,
Operational insulation from input to output and input/
output to case,
The use in an overvoltage category II environment,
The use in a pollution degree 2 environment.
The switching regulators are subject to manufacturing sur-
veillance in accordance with the above mentioned UL and
CSA and with ISO 9001 standards.
相关PDF资料 |
PDF描述 |
|---|---|
| PSR122.5-7-7PY | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSR362-7-9IRY | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSR362-7-9RY | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSA55-7-7IR | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PSR122.5-7-7IP | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PSR15H040-R5P-P2E4F | 制造商:Thomas & Betts 功能描述:HAZ 1,HPS,RESTR,1502,MT,REFR,FUS,UP |
| PSR15H040-TGP-P2U | 制造商:Thomas & Betts 功能描述:HAZ 1,HPS,RESTR,150W,MT,PEND,UNIPK |
| PSR15N08AK | 功能描述:8 Ohm Magnetic Speaker 500mW 750Hz ~ 20kHz Top Round 89dB (max) 制造商:mallory sonalert products inc. 系列:PSR 零件状态:有效 类型:磁性 频率范围:750Hz ~ 20kHz 阻抗:8 欧姆 声压级:89dB （最小值） 功率 - 额定值:500mW 功率 - 最大值:800mW 端口位置:顶部 形状:圆形 材料 - 锥体:PET 材料 - 磁铁:Nd-Fe-B 端接:焊盘 大小/尺寸:15.00mm 直径 高度:3.30mm 标准包装:1 |
| PSR1609N08S3K | 功能描述:8 Ohm Magnetic Speaker 700mW 550Hz ~ 7kHz Top Rectangular 88dB (max) 制造商:mallory sonalert products inc. 系列:PSR 零件状态:有效 类型:磁性 频率范围:550Hz ~ 7kHz 阻抗:8 欧姆 声压级:88dB （最小值） 功率 - 额定值:700mW 功率 - 最大值:1W 端口位置:顶部 形状:矩形 材料 - 锥体:PET 材料 - 磁铁:Nd-Fe-B 端接:焊盘 大小/尺寸:16.00mm 长 x 9.00mm 宽 高度:3.10mm 标准包装:1 |
| PSR1635-02 | 功能描述:CABLE FLAT FLEX 2 COND .100" RoHS:是 类别:线缆，导线 >> FFC，FPC（扁平柔性） 系列:PSR1635 产品目录绘图:PSR1636 Series 标准包装:1 系列:PSR1636 导线数:20 间距:0.050"（1.27mm） 长度:500' (152.44m) 宽:1.050"（26.7mm） 其它名称:AE20-500PS-1636-20 |
发布紧急采购，3分钟左右您将得到回复。