- 您现在的位置：买卖IC网 > Datasheet目录500 > PT204-6B (Everlight Electronics Co Ltd)PHOTOTRANSISTOR 3MM NPN BK RAD Datasheet资料下载
参数资料
| 型号： | PT204-6B |
| 厂商： | Everlight Electronics Co Ltd |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | PHOTOTRANSISTOR 3MM NPN BK RAD |
| 标准包装： | 1,000 |
| 电压 - 集电极发射极击穿（最大）： | 30V |
| 电流 - 集电极 (Ic)（最大）： | 20mA |
| 电流 - 暗 (Id)（最大）： | 100µA |
| 波长： | 940nm |
| 安装类型： | 通孔 |
| 方向： | 顶视图 |
| 封装/外壳： | 径向，T-1 透镜 |
| 其它名称： | 1080-1151 |
DATASHEET
3mm Phototransistor
PT204-6B
Notes
1.
Lead Forming
?
?
?
?
?
During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it
may break the LEDs.
Cut the LED lead frames at room temperature. Cutting the lead frames at high temperatures may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs
are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs.
2.
Storage
?
?
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Everlight and the storage life limits
are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a
nitrogen atmosphere and moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can
occur.
3.
Soldering
?
?
Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb,
and soldering beyond the base of the tie bar is recommended.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
Soldering time
Distance
300 ℃ Max. (30W Max.)
3 sec Max.
3mm Min.(From solder
joint to epoxy bulb)
Preheat temp.
Bath temp. & time
Distance
100 ℃ Max. (60 sec Max.)
260 Max., 5 sec Max
3mm Min. (From solder
joint to epoxy bulb)
?
?
?
?
?
Recommended soldering profile
laminar wave
Fluxing
Prehead
Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering.
Dip and hand soldering should not be done more than one time
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to
room temperature.
A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.
8
www.everlight.com
:2
Revision Copyright ?
LifecyclePhase:
Release Rev.2
2010, Everlight All Rights Reserved. Release Date : JUNE.5.2013. Issue No:DPT-0000293 Date:2013-06-07 16:41:04.0
Expired Period: Forever
相关PDF资料 |
PDF描述 |
|---|---|
| PT204-6C | PHOTOTRANSISTOR 3MM NPN CLR RAD |
| PT222J2 | THERMISTOR 2252 OHM +/-0.20 C |
| PT2559B-F | PHOTOTRANSISTOR SIDE FACE BK RAD |
| PT2559B/L2/H2-F | PHOTOTRANSISTOR SIDE FACE BK RAD |
| PT26-21B/TR8 | PHOTOTRANSISTOR FLAT BK MINI SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PT204-6B_06 | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:3mm Phototransistor T-1 |
| PT204-6C | 功能描述:PHOTOTRANSISTOR 3MM NPN CLR RAD RoHS:是 类别:传感器，转换器 >> 光学 - 光电检测器 - 光电晶体管 系列:- 标准包装:1,200 系列:- 电压 - 集电极发射极击穿（最大）:30V 电流 - 集电极 (Ic)（最大）:1mA 电流 - 暗 (Id)（最大）:100nA 波长:880nm 视角:24° 功率 - 最大:100mW 安装类型:通孔 方向:顶视图 封装/外壳:径向 |
| PT2047 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-202 |
| PT-205 | 功能描述:WIRE TIE PUSHBUTTON NAT POLY RoHS:是 类别:线缆，导线 - 管理 >> 扎带 系列:PT 标准包装:1,000 系列:PAN-TY® 导线/缆线捆扎带类型:标准，锁定 线束直径:5.00"（127.00mm） 长度:1.46'（444.40mm） 宽:0.190"（4.80mm） 安装类型:自由悬挂 张力强度:50 磅（22.7 kg） 特点:- 材质:尼龙 包装:每包 1000 个 颜色:灰 |
| PT205112 | 制造商:Hubbell Wiring Device-Kellems 功能描述:Non-Metallic Plugtrak 6 FT Base And Cover |
发布紧急采购，3分钟左右您将得到回复。