参数资料
型号: PT6465N
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, SMA12
封装: VERTICAL MOUNT PACKAGE-12
文件页数: 10/12页
文件大小: 216K
代理商: PT6465N
Application Notes
For technical support and more information, see inside back cover or visit www.ti.com
PT6460 & PT6470 Series
Adjusting the Output Voltage of the PT6460 &
PT6470 ISR Series
The output voltage of the PT6460 (5-V input) and the
PT6470 (3.3-V input) series of power modules may be
adjusted higher or lower than the pre-set voltage. The
adjustment method requires a single external resistor.
The value of the resistor can either be calculated using
the formulas given below, or simply selected from the
range of values given in Table 3-2. Table 3-1 gives the
allowable adjustment range for each model as Va (min)
and Va (max). Refer to Figure 3-1 for the placement of
the required resistor. Resistor R1 adjusts the output voltage
up, and the resistor (R2) adjusts it down.
Adjust Up:
An increase in the output voltage is obtained
by adding a resistor R2, between Vo Adjust (pin 12) and
GND (pin 5).
Adjust Down:
Add a resistor (R1), between Vo Adjust (pin 12)
and +Vsense (pin 11).
Figure 3-1
The values of (R
1) [adjust down], and R2 [adjust up],
can be calculated using the following formulas. Refer to
Figure 3-1 for the placement of the required resistor;
either (R
1) or R2 as appropriate.
(R1)
=
Ro (Va – 0.8)
– Rs
k
Vo – Va
R2
=
0.8 Ro
– Rs
k
Va – Vo
Where:
Vo = Original output voltage
Va = Adjusted output voltage
Ro = The resistance value from Table 3-1
Rs = The series resistance from Table 3-1
R
2
Adjust Up
C
IN
560 F
(Req'd)
+V
O
COM
+V
IN
+
(R
1)
Adj Down
PT6460/70
2–4
5–812
9–10
Vin
Vout
Vo(adj)
GND
1
Inhibit*
C
OUT
330 F
(Optional)
+Vsense
+
11
Notes:
1. Use a 1 % (or better) tolerance resistor in either the (R1)
or R2 location. Place the resistor as close to the ISR as
possible.
2. Never connect capacitors from Vo adj to either GND or
Vout. Any capacitance added to the Vo adjust pin will affect
the stability of the ISR.
3. If the remote sense feature is not being used, the adjust
resistor (R1) can also be connected to Vout, (pins 9–10)
instead of +Vsense.
4. The PT6472 may not be adjusted higher than the
nominal output voltage of 2.5 V. There is insufficient
input voltage to allow for any increase in output voltage.
Table 3-1
ISR OUTPUT VOLTAGE ADJUSTMENT RANGE AND FORMULA PARAMETERS
Series Pt. Nos.
5-V Bus:
PT6461
PT6462
PT6463
PT6464
PT6465
PT6466
PT6467
3.3-V Bus:
N/A
PT6472
PT6473
PT6474
PT6475
PT6476
PT6477
Vo (nom)
3.3 V
2.5 V
2.0 V
1.8 V
1.5 V
1.2 V
1 V
Va (min)
2.6 V
2.0 V
1.66 V
1.52 V
1.31 V
1.1 V
0.95 V
Va (max)
3.63 V
2.8 V *
2.32 V
2.1 V
1.82 V
1.52 V
1.32 V
Ro (k
)
10.2
10.7
10.0
10.2
9.76
10.0
10.2
Rs (k
)
24.9
* The PT6472 may not be adjusted higher than its nominal output voltage of 2.5 V. See note 4
相关PDF资料
PDF描述
PT6461N 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, SMA12
PT6466C 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, SMA12
PT6472A 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, MSMA12
PT6472N 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, MSMA12
PT6474C 14 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, MSMA12
相关代理商/技术参数
参数描述
PT6466 制造商:TI 制造商全称:Texas Instruments 功能描述:14-A 5-V Input Adjustable Integrated Switching Regulator
PT6466A 功能描述:DC/DC转换器 1.2V 14A 5-V Input Adj Step-Down ISR RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PT6466C 功能描述:DC/DC转换器 1.2V 14A 5-V Input Adj Step-Down ISR RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PT6466N 功能描述:DC/DC转换器 1.2V 14A 5-V Input Adj Step-Down ISR RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PT6467 制造商:TI 制造商全称:Texas Instruments 功能描述:14-A 5-V Input Adjustable Integrated Switching Regulator