参数资料
型号: PTB48580BAH
厂商: TEXAS INSTRUMENTS INC
元件分类: 电源模块
英文描述: 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE
封装: DIP-8
文件页数: 12/13页
文件大小: 394K
代理商: PTB48580BAH
Application Notes
For technical support and further information visit http://power.ti.com
Configuring the PTB48580 Series of
DC/DC Converters for DSL Applications
When operated as a pair, the PTB4850x and PTB48580
converters are specifically designed to provide all the
required supply voltages for powering xDSL chipsets.
The PTB4850x produces two logic voltages. They include
a 3.3-V source for logic and I/O, and a low-voltage for
powering a digital signal processor core. The PTB48580
produces a balanced pair of complementary supply voltages
that is required for the xDSL transceiver ICs. When used
together in these types of applications, the PTB4850x and
PTB48580 may be configured for power-up sequencing,
and also synchronized to a common switch conversion
frequency. Figure 2-1 shows the required cross-connects
between the two converters to enable these two features.
Switching Frequency Synchronization
Unsynchronized, the difference in switch frequency
introduces a beat frequency into the input and output
AC ripple components from the converters. The beat
frequency can vary considerably with any slight variation
in either converter’s switch frequency. This results in a
variable and undefined frequency spectrum for the ripple
waveforms, which would normally require separate filters
at the input of each converter. When the switch frequency
of the converters are synchronized, the ripple components
are constrained to the fundamental and higher. This
simplifies the design of the output filters, and allows a
common filter to be specified for the treatment of input
ripple.
Figure 2-1; Example of PTB4850x & PTB48580A Modules Configured for DSL Applications
–VTCVR
PTB4850xA
+VI
Enable
–VI
VO1
VO2
COM
Sync Out
EN Out
VO2 Adj
PTB48580A
+VI
Enable
–VI
+VO
–VO
COM
Sync In
±VO Adj
VCCIO
VCORE
+VTCVR
–48 V RTN
–48 V
Input
Filter
+
Power-Up Sequencing
The desired power-up sequence for the AC7 supply volt-
ages requires that the two logic-level voltages from the
PTB4850x converter rise to regulation prior to the two
complementary voltages that power the transceiver ICs.
This sequence cannot be guaranteed if the PTB4850x
and PTB48580 are allowed to power up independently,
especially if the 48-V input voltage rises relatively slowly.
To ensure the desired power-up sequence, the “EN Out”
pin of the PTB4850x is directly connected to the active-
low “Enable” input of the PTB48580 (see Figure 2-1).
This allows the PTB4850x to momentarily hold off the
outputs from the PTB48580 until the logic-level voltages
have risen first. Figure 2-2 shows the power-up wave-
forms of all four supply voltages from the schematic of
Figure 2-1.
Figure 2-2; Power-Up Sequencing Waveforms
PTB48580 Series
V
(1 V/Div)
V
(1 V/Div)
CORE
CCIO
+V
(5 V/Div)
–V
(5 V/Div)
TCVR
HORIZ SCALE: 10 ms/Div
相关PDF资料
PDF描述
PTB48580BAZ 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE
PTB48580AAZ 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE
PTB48580AAH 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE
PTB48580BAS 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE
PTD08A015WAD DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PTB48580BAS 功能描述:直流/直流开关转换器 .+/-12V 30W Comp Out put DC/DC Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
PTB48580BAZ 功能描述:DC/DC转换器 +/-12 V 30-W Comp Output DC/DC Conv RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PTB48600A 制造商:TI 制造商全称:Texas Instruments 功能描述:85 W Dual Complementary-Output DC/DC Converter for DSL
PTB48600AAH 功能描述:DC/DC转换器 85 W Dual Comp-Out DC/DC Cnvrtr for DSL RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PTB48600AAS 功能描述:DC/DC转换器 85 W Dual Comp-Out DC/DC Cnvrtr for DSL RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸: