- 您现在的位置：买卖IC网 > PDF目录98064 > PTEA404120P2AS (TEXAS INSTRUMENTS INC) 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PTEA404120P2AS |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ONE-EIGHTH BRICK PACKAGE-8 |
| 文件页数： | 11/12页 |
| 文件大小： | 151K |
| 代理商： | PTEA404120P2AS |
www.ti.com
Positive Output Enable (PEN)
SLTS274 – DECEMBER 2006
For those models with the positive enable (PEN) option, leaving pin 2 open circuit, (or driving it to an equivalent
logic high voltage), will enable the converter output. This allows the module to produce an output voltage
whenever a valid input source voltage is applied to +VI with respect to –VI. If a logic-low signal is then applied to
pin 2 the converter output is disabled. Table 2 gives the input requirements of pin 2 for modules with the PEN
option.
Table 2. On/Off Control Requirements
for Positive Enable
PARAMETER
MIN
TYP
MAX
UNITS
VIH
Enable
4.5
20
V
VIL
Disable
–0.2
0.8
Vo/c
Open-Circuit
5
7
II
Pin 2 at –VI
–0.5
mA
Notes:
1. The Remote On/Off control uses –VI (pin 3) as its ground reference. All voltages are with respect to –VI.
2. An open-collector device (preferably a discrete transistor) is recommended. A pull-up resistor is not
required. If one is added the pull-up voltage should not exceed 20 V.
Caution:Do not use a pull-resistor to +VI (pin 1). The remote On/Off control has a maximum input voltage of
20 V. Exceeding this voltage will overstress, and possibly damage, the converter.
3. The Remote On/Off pin may be controlled with devices that have a totem-pole output. This is provided the
output high level voltage (VOH) meets the module's minimum VIH specified in Table 1. If a TTL gate is
used, a pull-up resistor may be required to the logic supply voltage.
4. The converter incorporates an undervoltage lockout (UVLO). The UVLO keeps the converter off until the
input voltage is close to the minimum specified operating voltage. This is regardless of the state of the
Remote On/Off control. Consult the product specification for the UVLO input voltage thresholds.
8
相关PDF资料 |
PDF描述 |
|---|---|
| PTEA404120N2AS | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| PTEA404120N2AZ | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| PTEA415050N2AD | DC-DC REG PWR SUPPLY MODULE |
| PTEA415050P2AD | DC-DC REG PWR SUPPLY MODULE |
| PTEA420025P2AD | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PTEA404120P2AZ | 制造商:TI 制造商全称:Texas Instruments 功能描述:50-W, 48-V INPUT, 12-V OUTPUT, ISOLATED DC/DC CONVERTER |
| PTEA415050 | 制造商:TI 制造商全称:Texas Instruments 功能描述:15-A, 48-V INPUT, 5-V OUTPUT, ISOLATED, 1/8th BRICK DC/DC CONVERTER |
| PTEA415050N2AD | 功能描述:DC/DC转换器 15A,48V In,5V Out Iso,DC/DC Converter RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTEA415050P2AD | 功能描述:DC/DC转换器 15A,48V In,5V Out Iso,DC/DC Converter RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTEA420025 | 制造商:TI 制造商全称:Texas Instruments 功能描述:20-A, 48-V INPUT, ISOLATED, 1/8th BRICK DC-DC CONVERTER |
发布紧急采购，3分钟左右您将得到回复。