- 您现在的位置：买卖IC网 > PDF目录69254 > PTH08T240WAZ (TEXAS INSTRUMENTS INC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PTH08T240WAZ |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-11 |
| 文件页数： | 9/39页 |
| 文件大小： | 1366K |
| 代理商： | PTH08T240WAZ |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页
TurboTrans Technology
TurboTrans Selection
www.ti.com ................................................................................................................................................... SLTS264J – NOVEMBER 2005 – REVISED JUNE 2009
TurboTrans technology is a feature introduced in the T2 generation of the PTH/PTV family of power modules.
TurboTrans optimizes the transient response of the regulator with added external capacitance using a single
external resistor. Benefits of this technology include reduced output capacitance, minimized output voltage
deviation following a load transient, and enhanced stability when using ultra-low ESR output capacitors. The
amount of output capacitance required to meet a target output voltage deviation will be reduced with TurboTrans
activated. Likewise, for a given amount of output capacitance, with TurboTrans engaged, the amplitude of the
voltage deviation following a load transient will be reduced. Applications requiring tight transient voltage
tolerances and minimized capacitor footprint area will benefit greatly from this technology.
Utilizing TurboTrans requires connecting a resistor, RTT, between the +Sense pin (pin6) and the TurboTrans pin
(pin9). The value of the resistor directly corresponds to the amount of output capacitance required. All T2
products require a minimum value of output capacitance whether or not TurboTrans is utilized. For the
PTH08T240W, the minimum required capacitance is 220
F. The minimum required capacitance for the
PTH08T241W is 300
F of ceramic type. When using TurboTrans, capacitors with a capacitance × ESR product
below 10,000
F×m are required. (Multiply the capacitance (in F) by the ESR (in m) to determine the
capacitance × ESR product.) See the Capacitor Selection section of the datasheet for a variety of capacitors that
meet this criteria.
Figure 12 thru Figure 17 show the amount of output capacitance required to meet a desired transient voltage
deviation with and without TurboTrans for several capacitor types; TypeA (e.g. ceramic), TypeB (e.g.
polymer-tantalum), and TypeC (e.g. OS-CON). To calculate the proper value of RTT, first determine your required
transient voltage deviation limits and magnitude of your transient load step. Next, determine what type of output
capacitors will be used. (If more than one type of output capacitor is used, select the capacitor type that makes
up the majority of your total output capacitance.) Knowing this information, use the chart in Figure 12 thru
Figure 17 that corresponds to the capacitor type selected. To use the chart, begin by dividing the maximum
voltage deviation limit (in mV) by the magnitude of your load step (in Amps). This gives a mV/A value. Find this
value on the Y-axis of the appropriate chart. Read across the graph to the 'With TurboTrans' plot. From this
point, read down to the X-axis which lists the minimum required capacitance, CO, to meet that transient voltage
deviation. The required RTT resistor value can then be calculated using the equation or selected from the
TurboTrans table. The TurboTrans tables include both the required output capacitance and the corresponding
RTT values to meet several values of transient voltage deviation for 25%(2.5A), 50%(5A), and 75%(7.5A) output
load steps.
The chart can also be used to determine the achievable transient voltage deviation for a given amount of output
capacitance. By selecting the amount of output capacitance along the X-axis, reading up to the desired 'With
TurboTrans'' curve, and then over to the Y-axis, gives the transient voltage deviation limit for that value of output
capacitance. The required RTT resistor value can be calculated using the equation or selected from the
TurboTrans table.
As an example, let's look at a 12-V application requiring a 50 mV deviation during an 5A, 50% load transient. A
majority of 330
F, 10 mΩ ouput capacitors will be used. Use the 12-V, Type B capacitor chart, Figure 14.
Dividing 50mV by 5A gives 10mV/A transient voltage deviation per amp of transient load step. Select 10mV/A on
the Y-axis and read across to the 'With TurboTrans'' plot. Following this point down to the X-axis gives a
minimum required output capacitance of approximately 680
F. The required R
TT resistor value for 680F can
To see the benefit of TurboTrans, follow the 10mV/A marking across to the 'Without TurboTrans' plot. Following
that point down shows that you would need a minimum of 3000
F of output capacitance to meet the same
transient deviation limit. This is the benefit of TurboTrans.
Copyright 2005–2009, Texas Instruments Incorporated
17
Product Folder Link(s): PTH08T240W PTH08T241W
相关PDF资料 |
PDF描述 |
|---|---|
| PTH08T240WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTH08T240WAZT | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTH08T250WAST | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTH08T250WAD | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTH08T250WAS | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PTH08T240WAZ | 制造商:Texas Instruments 功能描述:DC/DC Converter |
| PTH08T240WAZT | 功能描述:DC/DC转换器 10A 4.5-14V-Input Wide-Out Adj Pwr Mdl RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTH08T241W | 制造商:TI 制造商全称:Texas Instruments 功能描述:10-A, 4.5-V to 14-V INPUT, NON-ISOLATED, WIDE-OUTPUT, ADJUSTABLE POWER MODULE WITH TURBOTRANS |
| PTH08T241WAD | 功能描述:DC/DC转换器 10A 4.5V to 14V Inp Ceramic Cap Version RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTH08T241WAS | 功能描述:DC/DC转换器 10A 4.5V to 14V Inp Ceramic Cap Version RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。