- 您现在的位置：买卖IC网 > PDF目录69257 > PTN78000AAZ (TEXAS INSTRUMENTS INC) 1-OUTPUT 9 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PTN78000AAZ |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 9 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-5 |
| 文件页数： | 5/19页 |
| 文件大小： | 492K |
| 代理商： | PTN78000AAZ |
www.ti.com
Optional Input/Output Filters
Input/Output Capacitors
C4
100 F
(Required)
m
(See Note B)
C3
2 x 4.7 F
Ceramic
(Required)
m
(See Note A)
C2
100 F
Electrolytic
(Required)
m
C1
4.7 F
Ceramic
m
RSET
C5
4.7 F
Ceramic
m
GND
PTN78000A
4
1
2
VI
VO
GND
5
Adj
π Filters
PTN78000A
SLTS246B–APRIL 2005–REVISED JANUARY 2006
Power modules include internal input and output ceramic capacitors in all their designs. However, some
applications require much lower levels of either input reflected or output ripple/noise. This application describes
various filters and design techniques found to be successful in reducing both input and output ripple/noise.
The easiest way to reduce output ripple and noise is to add one or more 1-μF ceramic capacitors, such as C5
shown in Figure 19. Ceramic capacitors should be placed close to the output power terminals. A single 4.7-μF
capacitor reduces the output ripple/noise by 10% to 30% for modules with a rated output current of less than 3 A.
(Note: C4 is recommended to improve the regulators transient response and does not reduce output ripple and
noise.)
Switching regulators draw current from the input line in pulses at their operating frequency. The amount of
reflected (input) ripple/noise generated is directly proportional to the equivalent source impedance of the power
source including the impedance of any input lines. The addition of C1, minimum 4.7-μF ceramic capacitor, near
the input power pins, reduces reflected conducted ripple/noise by 20% to 30%.
A.
See specifications for required value and type.
B.
See Application Information for suggested value and type.
Figure 19. Adding High-Frequency Bypass Capacitors to the Input and Output
If a further reduction in ripple/noise level is required for an application, higher order filters must be used. A π (pi)
filter, employing a ferrite bead (Fair-Rite Pt. No. 2673000701 or equivalent) in series with the input or output
terminals of the regulator reduces the ripple/noise by at least 20 db (see Figure 20 and Figure 21). In order for
the inductor to be effective in reduction of ripple and noise ceramic capacitors are required. (See the Capacitor
Recommendations for the PTN78000A for additional information on vendors and component suggestions.)
These inductors plus ceramic capacitors form an excellent filter because of the rejection at the switching
frequency (650 kHz - 1 MHz). The placement of this filter is critical. It must be located as close as possible to the
input or output pins to be effective. The ferrite bead is small (12,5 mm × 3 mm), easy to use, low cost, and has
low dc resistance. Fair-Rite also manufactures a surface-mount bead (part number 2773021447), through hole
(part number 2673000701) rated to 5 A. Alternatively, 1-μHto 5-μH inductors can be used in place of the ferrite
inductor bead.
13
相关PDF资料 |
PDF描述 |
|---|---|
| PTN78000AAH | 1-OUTPUT 9 W DC-DC REG PWR SUPPLY MODULE |
| PTN78000HAST | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
| PTN78000HAZ | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
| PTN78000WAZT | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
| PTN78000HAH | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PTN78000AAZT | 功能描述:DC/DC转换器 1.5A Wide Inp/ Neg Out Adj Module RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTN78000H | 制造商:TI 制造商全称:Texas Instruments 功能描述:1.5-A, WIDE-INPUT ADJUSTABLE SWITCHING REGULATOR |
| PTN78000HAH | 功能描述:DC/DC转换器 1.5 A Wide I/O Adj Module RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTN78000HAH | 制造商:Texas Instruments 功能描述:DC/DC Converter (DC-DC) / Switching Regu |
| PTN78000HAS | 功能描述:DC/DC转换器 1.5 A Wide I/O Adj Module RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。