- 您现在的位置：买卖IC网 > PDF目录98066 > PTQB425080N3AD (TEXAS INSTRUMENTS INC) 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PTQB425080N3AD |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-7 |
| 文件页数： | 12/14页 |
| 文件大小： | 466K |
| 代理商： | PTQB425080N3AD |
Using the Remote On/Off Function on the PTQB425080 Series of DC/DC Converters
Negative Output Enable (N Option)
Positive Output Enable (P Option)
www.ti.com........................................................................................................................................ SLTS269B – DECEMBER 2006 – REVISED NOVEMBER 2007
For applications requiring output voltage On/Off control, the PTQB425080 series of DC/DC converters
incorporate a Remote On/Off control (pin 2). This feature can be used to switch the module off without removing
the applied input source voltage. When placed in the Off state, the standby current drawn from the input source
is typically reduced to 3 mA.
Models using the negative enable option, the Remote On/Off (pin 2) control must be driven to a logic low voltage
for the converter to produce an output. This is accomplished by either permanently connecting pin 2 to –VI (pin
3), or driving it low with an external control signal. Table 1 shows the input requirements of pin 2 for those
modules with the NEN option.
Table 1. On/Off Control Requirements
for Negative Enable
PARAMETER
MIN
TYP
MAX
VIH
Disable
2.4 V
20 V
VIL
Enable
–0.2 V
0.8 V
Vo/c
Open-Circuit
9 V
15 V
II
Pin 2 at –VI
–0.75 mA
For those models with the positive enable option, leaving pin 2 open circuit, (or driving it to an equivalent logic
high voltage), enables the converter output. This allows the module to produce an output voltage whenever a
valid input source voltage is applied to +VI with respect to –VI. If a logic-low signal is then applied to pin 2 the
converter output is disabled. Table 2 gives the input requirements of pin 2 for modules with the PEN option.
Table 2. On/Off Control Requirements
for Positive Enable
PARAMETER
MIN
TYP
MAX
VIH
Enable
4.5 V
20 V
VIL
Disable
–0.2 V
0.8 V
Vo/c
Open-Circuit
5 V
7 V
II
Pin 2 at –VI
–0.5 mA
Notes:
1. The Remote On/Off control uses –VI (pin 3) as its ground reference. All voltages are with respect to –VI.
2. An open-collector device (preferably a discrete transistor) is recommended. A pull-up resistor is not required.
If one is added the pull-up voltage should not exceed 20 V.
Caution: Do not use a pull-resistor to +VI (pin 1). The remote On/Off control has a maximum input voltage of
20 V. Exceeding this voltage can overstress, and possibly damage, the converter.
3. The Remote On/Off pin may be controlled with devices that have a totem-pole output. This is provided the
output high level voltage (VOH) meets the module's minimum VIH specified in Table 1. If a TTL gate is used, a
pull-up resistor may be required to the logic supply voltage.
4. The converter incorporates an undervoltage lockout (UVLO). The UVLO keeps the converter off until the
input voltage is close to the minimum specified operating voltage. This is regardless of the state of the
Remote On/Off control. Consult the product specification for the UVLO input voltage thresholds.
Copyright 2006–2007, Texas Instruments Incorporated
7
Product Folder Link(s): PTQB425080
相关PDF资料 |
PDF描述 |
|---|---|
| PTR08060WVD | 6 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, PSIP5 |
| PTR08100WVD | 10 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, PSIP5 |
| PTV03020WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV05010WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| PTV08T250WAH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PTQB425080P2AD | 功能描述:DC/DC转换器 200-W 48-V Input 8-V Output Isolated RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PTQB425080P3AD | 功能描述:DC/DC转换器 200-W 48-V Input 8-V Output Isolated RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| P-TQFP-100-3 | 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:2 Channel Serial Optimized Communication Controller for HDLC/PPP |
| PTQPA-1 | 制造商:Distributed By MCM 功能描述:PERFECT 10 DBS Pipe Adaptor |
| PTR | 功能描述:电源排插 TOKEN RING PROTECTOR RoHS:否 制造商:Wiremold 出口数量: 浪涌能量额定值: 数据线路保护:N 电线长度:15 ft 安装风格: 输出电压:120 V 电流额定值:15 A |
发布紧急采购，3分钟左右您将得到回复。