- 您现在的位置：买卖IC网 > PDF目录98066 > PVX012A0X43-SRZ (LINEAGE POWER LLC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PVX012A0X43-SRZ |
| 厂商： | LINEAGE POWER LLC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-17/8 |
| 文件页数： | 15/23页 |
| 文件大小： | 1215K |
| 代理商： | PVX012A0X43-SRZ |
Data Sheet
May 13, 2011
12A Analog Pico DLynxTM: Non-isolated DC-DC Power Modules
3 – 14.4Vdc input; 0.6Vdc to 5.5Vdc output; 12A output current
LINEAGE POWER
22
Surface Mount Information
Pick and Place
The 12VAnalog Pico DLynxTM 12A modules use an
open frame construction and are designed for a fully
automated assembly process. The modules are fitted
with a label designed to provide a large surface area
for pick and place operations. The label meets all the
requirements for surface mount processing, as well as
safety standards, and is able to withstand reflow
temperatures of up to 300
oC. The label also carries
product information such as product code, serial
number and the location of manufacture.
Nozzle Recommendations
The module weight has been kept to a minimum by
using open frame construction. Variables such as
nozzle size, tip style, vacuum pressure and placement
speed should be considered to optimize this process.
The minimum recommended inside nozzle diameter
for reliable operation is 3mm. The maximum nozzle
outer diameter, which will safely fit within the allowable
component spacing, is 7 mm.
Bottom Side / First Side Assembly
This module is not recommended for assembly on the
bottom side of a customer board. If such an assembly
is attempted, components may fall off the module
during the second reflow process. If assembly on the
bottom side is planned, please contact Lineage Power
for special manufacturing process instructions
Lead Free Soldering
The 12VAnalog Pico DLynxTM 12A modules are lead-
free (Pb-free) and RoHS compliant and fully
compatible in a Pb-free soldering process. Failure to
observe the instructions below may result in the failure
of or cause damage to the modules and can adversely
affect long-term reliability.
Pb-free Reflow Profile
Power Systems will comply with J-STD-020 Rev. C
(Moisture/Reflow Sensitivity Classification for
Nonhermetic Solid State Surface Mount Devices) for
both Pb-free solder profiles and MSL classification
procedures. This standard provides a recommended
forced-air-convection reflow profile based on the
volume and thickness of the package (table 4-2). The
suggested Pb-free solder paste is Sn/Ag/Cu (SAC).
For questions regarding LGA, solder volume; please
contact Lineage Power for special manufacturing
process instructions.
The recommended linear reflow profile using Sn/Ag/Cu
solder is shown in Fig. 48. Soldering outside of the
recommended profile requires testing to verify results
and performance.
MSL Rating
The 12VAnalog Pico DLynxTM 12A modules have a
MSL rating of 1.
Storage and Handling
The recommended storage environment and handling
procedures for moisture-sensitive surface mount
packages is detailed in J-STD-033 Rev. A (Handling,
Packing, Shipping and Use of Moisture/Reflow
Sensitive Surface Mount Devices). Moisture barrier
bags (MBB) with desiccant are required for MSL
ratings of 2 or greater. These sealed packages should
not be broken until time of use. Once the original
package is broken, the floor life of the product at
conditions of
≤ 30°C and 60% relative humidity varies
according to the MSL rating (see J-STD-033A). The
shelf life for dry packed SMT packages will be a
minimum of 12 months from the bag seal date, when
stored at the following conditions: < 40° C, < 90%
relative humidity.
Figure 48. Recommended linear reflow profile
using Sn/Ag/Cu solder.
Post Solder Cleaning and Drying
Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The
result of inadequate cleaning and drying can affect
both the reliability of a power module and the testability
of the finished circuit-board assembly. For guidance on
appropriate soldering, cleaning and drying procedures,
refer to Board Mounted Power Modules: Soldering and
Cleaning Application Note (AN04-001).
Per J-STD-020 Rev. C
0
50
100
150
200
250
300
Reflow Time (Seconds)
R
efl
ow
T
em
p
(°
C
)
Heating Zone
1°C/Second
Peak Temp 260°C
* Min. Time Above 235°C
15 Seconds
*Time Above 217°C
60 Seconds
Cooling
Zone
相关PDF资料 |
PDF描述 |
|---|---|
| PW-82351-120 | BRUSHLESS DC MOTOR CONTROLLER, 150 A, XMA |
| PWM5032-DIE | 1 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, UUC |
| PWR-82332-300 | AC MOTOR CONTROLLER, 25 A, DFM26 |
| PWR-82332-320 | AC MOTOR CONTROLLER, 25 A, DFM26 |
| PWR-82332-310 | AC MOTOR CONTROLLER, 25 A, DFM26 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PVX0-14-19PN | 制造商:ITT Interconnect Solutions 功能描述:PVX0-14-19PN / 076875-0002 / CIRCULAR |
| PVX0-14-19PW | 制造商:ITT Interconnect Solutions 功能描述:PVX0-14-19PW / 076875-0002 W / CIRCULAR |
| PVX0-14-19SN-63 | 制造商:ITT 功能描述:Circular 制造商:ITT Interconnect Solutions 功能描述:Circular 制造商:ITT Interconnect Solutions 功能描述:PVX0-14-19SN-63 / 076582-0089 / CIRCULAR |
| PVX0-14-4PN | 制造商:ITT Interconnect Solutions 功能描述:PVX0-14-4PN - Bulk |
| PVX0-16-26PN | 制造商:ITT Interconnect Solutions 功能描述:PVX0-16-26PN / 076876-0000 / Circular |
发布紧急采购，3分钟左右您将得到回复。