- 您现在的位置：买卖IC网 > PDF目录17508 > PVZ2A102C04R00 (Murata Electronics North America)TRIMMER 1K OHM 0.05W SMD PDF资料下载
参数资料
| 型号： | PVZ2A102C04R00 |
| 厂商： | Murata Electronics North America |
| 文件页数： | 49/55页 |
| 文件大小： | 0K |
| 描述： | TRIMMER 1K OHM 0.05W SMD |
| 标准包装： | 3,000 |
| 系列： | PVZ2 |
| 电阻（欧姆）： | 1k |
| 功率（瓦特）： | 0.05W，1/20W |
| 容差： | ±30% |
| 温度系数： | ±500ppm/°C |
| 匝数： | 单路 |
| 调节型： | 顶部调节 |
| 电阻材料： | 碳 |
| 安装类型： | 表面贴装 |
| 端接类型： | J 引线 |
| 包装： | 带卷 (TR) |
| 尺寸/尺寸： | 方形 - 0.087" L x 0.083" W x 0.031" H（2.20mm x 2.10mm x 0.80mm） |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页当前第49页第50页第51页第52页第53页第54页第55页
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
R50E.pdf
Jul.23,2012
SMD Sealed Type (PVG3/M4A_D01/G5)/Lead Sealed Type (PV32/12/37/36) Speci?cations and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer
should be removed from the chamber, and maintained at a temperature of 25±5°C for 1-2 hours.
6
Temperature Cycle
Sequence 1
Temp. (°C) PV -- series -55±3
2 3 4
+25±2 +125±3 +25±2
Time (min.)
30
5 max.
30
5 max.
Table 4: One cycle of temperature cycle.
1) PV12, PV32, PVM4A --- D01 series
The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90-95%
without loading for 250±8 hours (500±12 hours for PVM4A --- D01 series). The trimmer potentiometer should be
removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.
2) PVG3, PVG5, PV36, PV37 series
The trimmer potentiometer should be subjected to the programmed humidity environment for 10 cycle (see Figure 3).
The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for
1.5±1/2 hours.
MIL-STD-202 METHOD 106
70
80-98%RH
80-98%RH
65
INITIAL CONDITIONING
90-98%RH
90-98%RH
90-98%RH
60
IN A DRY OVEN
55
50
45
24 HOURS
HUMIDITY
RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.
HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED
TO RADIANT HEAT FROM CHAMBER-CONDITIONING
40
UNCONTROLLED
PROCESSES
END OF FINAL CYCLE
7
Humidity
35
30
25
20
15
10
INITIAL MEASUREMENTS
AS SPECIFIED IN 3.2
+10°C
-2°C
CIRCULATION OF CONDITIONING AIR SHOULD
BE AT A MINIMUM CUBIC RATE PER MINUTE
EQUIVALENT TO 5 TIMES THE VOLUME OF
THE CHAMBER
MEASUREMENTS AS
SPECIFIED IN 3.6
±2°C AT ALL POINTS WITHIN THE
CHAMBER EXCEPT THE IMMEDIATE
VICINITY OF THE SPECIMENS AND
THE CHAMBER SURFACES
5
0
-5
-10
UNLESS OTHERWISE SPECIFIED
TEMPERATURE TOLERANCE IS,
VOLTAGE APPLIED AS SPECIFIED IN 3.5
STEPS 7a AND 7b PERFORMED DURING ANY
5 OF THE FIRST 9 CYCLES. HUMIDITY
UNCONTROLLED DURING STEPS 7a AND 7b
ONLY
STEP 7a
STEP 7b
PRIOR TO FIRST CYCLE
UNLESS OTHERWISE
STEP 1
STEP 2
STEP 3 STEP 4
STEP 5
STEP 6
STEP 7
SPECIFIED
ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Figure 3
1) PV -- series
8
9
Vibration
Shock
The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete
frequency range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the
three axis directions for a total of 12 sweeps.
1) PV -- series
The trimmer potentiometer should be shocked at the 100G level and should be subjected to 4 shocks in each of the
three axis directions for a total of 12 shocks.
2) PVM4A --- D01 series
The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the
six axis directions for a total of 18 shocks.
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently
10 Temperature Load Life
11 High Temperature Exposure
between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of
1000±12 hours, at a temperature of 70±2°C (85±2°C for PV37 series). The trimmer potentiometer should be
removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.
The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C 250±8 hours without
loading. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of
25±5°C for 1 to 2 hours.
The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.
12
13
Low Temperature Exposure
(Except for PVM4A --- D01)
Low Temperature Operation
(Only for PVM4A --- D01)
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.
The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for
approximately 24 hours.
The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for
PVM4A --- D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the
chamber, and maintained at a temperature of 25±5°C for 1-2 hours.
Continued on the following page.
47
相关PDF资料 |
PDF描述 |
|---|---|
| R0.25S12-1205/P-R | CONV DC/DC 0.25W 12V IN 5V OUT |
| NRVB120ESFT3G | DIODE SCHOTTKY 1A 20V SOD-123 |
| R0.25S12-1215/P-R | CONV DC/DC 0.25W 12V IN 15V OUT |
| PVZ2A102C04B00 | TRIMMER 1K OHM 0.05W SMD |
| R0.25S12-1215/H-R | CONV DC/DC 0.25W 12V IN 15V OUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PVZ2A103A01B00 | 制造商:Murata Manufacturing Co Ltd 功能描述:TRIMMER SMD 10K |
| PVZ2A103A01R00 | 功能描述:微调电阻器 - 表面贴装 10k ohm RoHS:否 制造商:Murata 产品:Single-Turn Trimmer Potentiometers 产品类型:Single Turn 转数:1 元件类型:Cermet 锥度:Linear 电阻:10 kOhms 电压额定值: 端接类型:SMD/SMT 功率额定值:250 mW (1/4 W) 容差:20 % 温度系数:150 PPM / C |
| PVZ2A103C04B00 | 功能描述:微调电阻器 - 表面贴装 10K ohm 2mm 50volt 0.05W Linear Single RoHS:否 制造商:Murata 产品:Single-Turn Trimmer Potentiometers 产品类型:Single Turn 转数:1 元件类型:Cermet 锥度:Linear 电阻:10 kOhms 电压额定值: 端接类型:SMD/SMT 功率额定值:250 mW (1/4 W) 容差:20 % 温度系数:150 PPM / C |
| PVZ2A103C04R00 | 功能描述:微调电阻器 - 表面贴装 10K ohm 2mm 50volt 0.05W Linear Single RoHS:否 制造商:Murata 产品:Single-Turn Trimmer Potentiometers 产品类型:Single Turn 转数:1 元件类型:Cermet 锥度:Linear 电阻:10 kOhms 电压额定值: 端接类型:SMD/SMT 功率额定值:250 mW (1/4 W) 容差:20 % 温度系数:150 PPM / C |
| PVZ2A104A01B00 | 制造商:Murata Manufacturing Co Ltd 功能描述:TRIMMER SMD 100K |
发布紧急采购，3分钟左右您将得到回复。