PWR51XX 10/98 REV D
Page 2
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
INPUT
Nominal Voltage
5VDC
Voltage Range
4.75
5.25
VDC
Input Current
No Load
60
mA
Rated Load
2400
2570
mA
Ripple Current
Rated Load
5
mAp-p
OUTPUT
PWR5104 Rated Voltage
±12
VDC
Rated Current
±375
mA
PWR5105 Rated Voltage
±15
VDC
Rated Current
±300
mA
Setpoint Accuracy
Rated Load, Nominal V
IN
±0.5
±1.0%
%
Voltage Balance
±0.3
%
Temperature Coefficient
–25°C to +85°C
±0.01
%/°C
Ripple and Noise
BW = DC to 10MHz
6
35
mVp-p
Line Regulation
0.02
%
Load Regulation
0.04
%
Efficiency
70
75
%
ISOLATION
Rated Voltage
750
VDC
Test Voltage
60 Hz, 10 Seconds
750
mVp-p
Resistance
10
G
Capacitance
50
pF
Leakage Current
240Vrms, 60Hz
15
Arms
GENERAL
Switching Frequency
50
kHz
Package Weight
50
g
TEMPERATURE
Specification
-25
+25
+85
°C
Operation
-40
+100
°C
Storage
-55
+125
°C
Note: Other input to output voltages may be available. Please consult factory.
ELECTRICAL SPECIFICATIONS
Specifications typical at T
A = +25°C, nominal input voltage, rated output current unless otherwise noted.
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for
the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the
circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or
in aircraft control applications.
Device Family
PWR indicates DC/DC converter
Model Number
Selected From Table of Electrical Specifications
Screening Option
PWR
51XX
/H
ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
Input Voltage ........................................................................................ 5.5VDC
Output Short Circuit Duration ....................................................... 15 seconds
Internal Power Dissipation ........................................................................ 4W
Lead Temperature (soldering, 10 seconds max) ................................. +300°C
TYPICAL PERFORMANCE CURVES
Typical at T
A = +25°C, nominal input voltage and rated output current unless otherwise noted.