参数资料
型号: Q24T25033-NBC0
厂商: Power-One
文件页数: 7/14页
文件大小: 0K
描述: DC/DC QTR BRICK 83W 3.3V T/H
标准包装: 50
系列: *
Q24T25033 DC-DC Converter Data Sheet
18-36 VDC Input; 3.3 VDC @ 25A Output
Protection Features
Input Undervoltage Lockout
Input undervoltage lockout is standard with this converter.
The converter will shut down when the input voltage drops
below a pre-determined voltage.
The input voltage must be at least 17.5 V for the converter to
turn on. Once the converter has been turned on, it will shut
off when the input voltage drops below 15 V. This feature is
beneficial in preventing deep discharging of batteries used in
telecom applications.
Output Overcurrent Protection (OCP)
The converter is protected against overcurrent or short cir-
cuit conditions. Upon sensing an overcurrent condition, the
converter will switch to constant current operation and there-
by begin to reduce output voltage. When the output voltage
drops below 1.2 VDC, the converter will shut down (Fig. 26).
Once the converter has shut down, it will attempt to restart
nominally every 100 ms with a 3% duty cycle (Fig 27). The
attempted restart will continue indefinitely until the overload
or short circuit conditions are removed or the output voltage
rises above 1.2 VDC.
Output Overvoltage Protection (OVP)
The converter will shut down if the output voltage across
Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds the threshold of
the OVP circuitry. The OVP circuitry contains its own refer-
ence, independent of the output voltage regulation loop.
Once the converter has shut down, it will attempt to restart
every 100 ms until the OVP condition is removed.
Overtemperature Protection (OTP)
The converter will shut down under an overtemperature con-
dition to protect itself from overheating caused by operation
outside the thermal derating curves, or operation in abnor-
mal conditions such as system fan failure. After the conver-
ter has cooled to a safe operating temperature, it will auto-
matically restart.
Safety Requirements
The converters meet North American and International safe-
ty regulatory requirements per UL60950 and EN60950. Ba-
sic Insulation is provided between input and output.
To comply with safety agencies requirements, an input line
fuse must be used external to the converter. A 10-A fuse is
recommended for use with this product.
Electromagnetic Compatibility (EMC)
EMC requirements must be met at the end-product system
level, as no specific standards dedicated to EMC characte-
ristics of board mounted component dc-dc converters exist.
However, Power-One tests its converters to several system
level standards, primary of which is the more stringent
EN55022, Information technology equipment - Radio distur-
bance characteristics - Limits and methods of measurement.
With the addition of a simple external filter (see application
notes), all versions of the Q24T25 converters pass the re-
quirements of Class B conducted emissions per EN55022
and FCC, and meet at a minimum, Class A radiated emis-
sions per EN 55022 and Class B per FCC Title 47CFR, Part
15-J. Please contact Power-One Applications Engineering
for details of this testing.
MCD10223 Rev. 1.0, 02-Sep-10
Page 7 of 14
www.power-one.com
相关PDF资料
PDF描述
Q24T30033-PDB0 DC/DC QTR BRICK 100W 3.3V T/H
Q48S08120-PS00 DC/DC QTR BRICK 96W 12V SMD
Q48T08120-NBB0 DC/DC QTR BRICK 96W 12V T/H
Q48T25018-NBB0 DC/DC QTR BRICK 45W 1.8V
Q48T25033-NBB0 DC/DC QTR BRICK 83W 3.3V T/H
相关代理商/技术参数
参数描述
Q24T25033NBC0G 制造商:Power-One 功能描述:Module DC-DC 1-OUT 3.3V 25A 8-Pin Quarter-Brick
Q24T25033-NBC0G 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
Q24T25033-NBCP 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 3.3V 25A 8PIN QUARTER-BRICK - Bulk
Q24T25033-NBCPG 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 3.3V 25A - Bulk
Q24T25033-NCA0 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 3.3V 25A - Bulk