参数资料
型号: Q24T30025-PBB0G
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
文件页数: 12/14页
文件大小: 329K
代理商: Q24T30025-PBB0G
JUN 01, 2003 revised to NOV 22, 2006
Page 7 of 14
www.power-one.com
Q24T30025 DC-DC Converter Data Sheet
18-36 VDC Input; 2.5 VDC @ 30A Output
Protection Features
Input Undervoltage Lockout
Input undervoltage lockout is standard with this converter.
The converter will shut down when the input voltage drops
below a pre-determined voltage.
The input voltage must be at least 17.5 V for the converter to
turn on. Once the converter has been turned on, it will shut
off when the input voltage drops below 15 V. This feature is
beneficial in preventing deep discharging of batteries used in
telecom applications.
Output Overcurrent Protection (OCP)
The converter is protected against overcurrent or short cir-
cuit conditions. Upon sensing an overcurrent condition, the
converter will switch to constant current operation and
thereby begin to reduce output voltage. When the output
voltage drops below 1 Vdc, the converter will shut down (Fig.
26).
Once the converter has shut down, it will attempt to restart
nominally every 100 ms with a 3% duty cycle (Fig 27). The
attempted restart will continue indefinitely until the overload
or short circuit conditions are removed or the output voltage
rises above 1 Vdc.
Output Over-Voltage Protection (OVP)
The converter will shut down if the output voltage across
Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds the threshold of
the OVP circuitry. The OVP circuitry contains its own refer-
ence, independent of the output voltage regulation loop.
Once the converter has shut down, it will attempt to restart
every 100 ms until the OVP condition is removed.
Overtemperature Protection (OTP)
The converter will shut down under an overtemperature con-
dition to protect itself from overheating caused by operation
outside the thermal derating curves, or operation in abnor-
mal conditions such as system fan failure. After the con-
verter has cooled to a safe operating temperature, it will
automatically restart.
Safety Requirements
The converters meet North American and International
safety regulatory requirements per UL60950 and EN60950.
Basic Insulation is provided between input and output.
To comply with safety agencies requirements, an input line
fuse must be used external to the converter. A 10-A fuse is
recommended for use with this product.
Electromagnetic Compatibility (EMC)
EMC requirements must be met at the end-product system
level, as no specific standards dedicated to EMC character-
istics of board mounted component dc-dc converters exist.
However, Power-One tests its converters to several system
level standards, primary of which is the more stringent
EN55022, Information technology equipment - Radio distur-
bance characteristics - Limits and methods of measurement.
With the addition of a simple external filter (see application
notes), all versions of the Q24T30 converters pass the re-
quirements of Class B conducted emissions per EN55022
and FCC, and meet at a minimum, Class A radiated emis-
sions per EN 55022 and Class B per FCC Title 47CFR, Part
15-J. Please contact Power-One Applications Engineering
for details of this testing.
相关PDF资料
PDF描述
Q2D25ZGB7C4 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
Q2D30ZEB8C4 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
Q2D30ZED7C4 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
Q2D30ZED-N7 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
Q2D30ZED 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
Q24T30025-PBBP 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 2.5V 30A - Bulk
Q24T30025-PBBPG 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 2.5V 30A - Bulk
Q24T30025-PBC0 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 2.5V 30A - Bulk
Q24T30025-PBC0G 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 2.5V 30A - Bulk
Q24T30025-PBCP 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 2.5V 30A - Bulk