参数资料
| 型号： | Q3-0.005-AC-108 |
| 厂商： | Bergquist |
| 文件页数： | 1/1页 |
| 文件大小： | 0K |
| 描述： | THERM PAD PWR MOD W/ADH Q3 |
| MSDS 材料安全数据表： | Q-Pad 3 MSDS |
| 标准包装： | 100 |
| 系列： | Q-Pad® 3 |
| 使用： | 电源模块 |
| 形状： | 矩形 |
| 外形： | 116.84mm x 60.96mm |
| 厚度： | 0.005"（0.127mm） |
| 材质： | 带石墨底座 |
| 胶合剂： | 粘合剂 - 一侧 |
| 背衬，载体： | 玻璃纤维 |
| 颜色： | 黑 |
| 热电阻系数： | 0.35°C/W |
| 导热性： | 2.0 W/m-K |
| 其它名称： | BER138 Q3AC-108 |
www.bergquistcompany.com
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_QP_3_12.08
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
The Bergquist Company -
European Headquarters
Bramenberg 9a, 3755 BT Eemnes
Netherlands
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company - Asia
Room 15, 8/F Wah Wai Industrial Centre
No. 38-40, Au Pui Wan Street
Fotan, Shatin, N.T. Hong Kong
Ph: 852.2690.9296
Fax: 852.2690.2344
Q-Pad 3
Glass-Reinforced Grease Replacement Thermal Interface
Features and Benefits
Thermal impedance:
0.35°C-in2/W (@50 psi)
Eliminates processing constraints typically
associated with grease
Conforms to surface textures
Easy handling
May be installed prior to soldering and
cleaning without worry
Bergquist Q-Pad 3 eliminates problems
associated with thermal grease such as conta-
mination of electronic assemblies and reflow
solder baths. Q-Pad 3 may be installed prior
to soldering and cleaning without worry.When
clamped between two surfaces, the elastomer
conforms to surface textures thereby creating
an air-free interface between heat-generating
components and heat sinks.
Fiberglass reinforcement enables Q-Pad 3 to
withstand processing stresses without losing
physical integrity. It also provides ease of
handling during application.
Typical Applications Include:
Between a transistor and a heat sink
Between two large surfaces such as an L-bracket and the chassis of an assembly
Between a heat sink and a chassis
Under electrically isolated power modules or devices such as resistors,
transformers and solid state relays
Configurations Available:
Sheet form, die-cut parts and roll form
With or without pressure sensitive adhesive
Building a Part Number
Standard Options
Sil-Pad
: U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others
Section
A
Section
B
Section
C
Section
D
Section
E
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
Q3 = Q-Pad 3 Material
Q3
0.005
AC
12/250
NA
Note: To build a part number, visit our website at www.bergquistcompany.com.
Standard thicknesses available: 0.005"
AC = Adhesive, one side
00 = No adhesive
_ _ _ = Standard configuration dash number,
1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls, or
00 = custom configuration
––
–
TYPICAL PROPERTIES OF Q-PAD 3
PROPERTY
IMPERIAL VALUE
METRIC VALUE
TEST METHOD
Color
Black
Visual
Reinforcement Carrier
Fiberglass
—
Thickness (inch) / (mm)
0.005
0.127
ASTM D374
Hardness (Shore A)
86
ASTM D2240
Continuous Use Temp (°F) / (°C)
-76 to 356
-60 to 180
—
ELECTRICAL
Dielectric Breakdown Voltage (Vac)
Non-Insulating
ASTM D149
Dielectric Constant (1000 Hz)
NA
ASTM D150
Volume Resistivity (Ohm-meter)
10
2
10
2
ASTM D257
Flame Rating
V-O
U.L.94
THERMAL
Thermal Conductivity (W/m-K)
2.0
ASTM D5470
THERMAL PERFORMANCE vs PRESSURE
Pressure (psi)
10
25
50
100
200
TO-220 Thermal Performance (°C/W)
2.26
1.99
1.76
1.53
1.30
Thermal Impedance (°C-in2/W) (1)
0.65
0.48
0.35
0.24
0.16
1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for
reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.
相关PDF资料 |
PDF描述 |
|---|---|
| OSTHT082080 | CON TERMINAL BLOCK SPRING CLAMP |
| SDT-S-112DMR,000 | RELAY GEN PURPOSE SPST 10A 12V |
| 965908-1 | CONN PIN 20-18AWG CRIMP TIN |
| OSTHT085080 | CON TERMINAL BLOCK SPRING CLAMP |
| SDT-S-109LMR,000 | RELAY GEN PURPOSE SPST 10A 9V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| Q3000M-MXM-T | 制造商:PNY Technologies 功能描述:QUADRO 3000M TYPE B - Bulk |
| Q300T3/CL/120V | 制造商:Eiko Ltd 功能描述: |
| Q300T3/CL/220V | 制造商:Eiko Ltd 功能描述: |
| Q300T3/CL-120V | 制造商:Eiko Ltd 功能描述: |
| Q30-12 | 功能描述:SINGLE O/P, DC-HV DC PCB MOUNT, 制造商:xp power 系列:XP EMCO - Q 包装:盒 零件状态:有效 类型:高电压 - 隔离模块 输出数:1 电压 - 输入（最小值）:0.7V 电压 - 输入（最大值）:12V 电压 - 输出 1:3000V 电压 - 输出 2:- 电压 - 输出 3:- 电流 - 输出（最大值）:167μA 功率（W） - 制造系列:500mW 电压 - 隔离:500V 应用:ITE（商业） 特性:SCP 安装类型:通孔 封装/外壳:6-DIP 模块（5 7 引线） 大小/尺寸:0.50" 长 x 0.50" 宽 x 0.50" 高（12.7mm x 12.7mm x 12.7mm） 工作温度:-25°C ~ 60°C 效率:- 功率（W） - 最大值:500mW 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。