参数资料
型号: QL48T30012-NBA0
厂商: Power-One
文件页数: 7/14页
文件大小: 0K
描述: DC/DC QTR BRICK 36W 1.2V OUT T/H
标准包装: 100
系列: *
QL48T30012 DC-DC Converter Data Sheet
36-75 VDC Input; 1.2 VDC @ 30A Output
Protection Features
Input Undervoltage Lockout
Input undervoltage lockout is standard with this converter.
The converter will shut down when the input voltage drops
below a pre-determined voltage.
The input voltage must be at least 35 V for the converter to
turn on. Once the converter has been turned on, it will shut
off when the input voltage drops below 31 V. This feature is
beneficial in preventing deep discharging of batteries used in
telecom applications.
Output Overcurrent Protection (OCP)
The converter is protected against overcurrent or short cir-
cuit conditions. Upon sensing an over-current condition, the
converter will switch to constant current operation and
thereby begin to reduce output voltage. When the output
voltage drops below 0.6 Vdc, the converter will shut down
(Fig. 25).
Once the converter has shut down, it will attempt to restart
nominally every 100 ms with a 3% duty cycle (Fig 26). The
attempted restart will continue indefinitely until the overload
or short circuit conditions are removed or the output voltage
rises above 0.6 Vdc.
Output Overvoltage Protection (OVP)
The converter will shut down if the output voltage across
Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds the threshold of
the OVP circuitry. The OVP circuitry contains its own refer-
ence, independent of the output voltage regulation loop.
Once the converter has shut down, it will attempt to restart
every 100 ms until the OVP condition is removed.
Overtemperature Protection (OTP)
The converter will shut down under an overtemperature con-
dition to protect itself from overheating caused by operation
outside the thermal derating curves, or operation in abnor-
mal conditions such as system fan failure. After the con-
verter has cooled to a safe operating temperature, it will
automatically restart.
Safety Requirements
The converters meet North American and International
safety regulatory requirements per UL60950 and EN60950.
Basic Insulation is provided between input and output.
To comply with safety agencies requirements, an input line
fuse must be used external to the converter. A 2.5-A fuse is
recommended for use with this product.
If one input fuse is used for a group of modules, the maxi-
mum fuse rating should not exceed 15-A (Q modules are UL
approved with up to a 15-A fuse).
Electromagnetic Compatibility (EMC)
EMC requirements must be met at the end-product system
level, as no specific standards dedicated to EMC character-
istics of board mounted component dc-dc converters exist.
However, Power-One tests its converters to several system
level standards, primary of which is the more stringent
EN55022, Information technology equipment - Radio distur-
bance characteristics - Limits and methods of measurement.
With the addition of a simple external filter (see application
notes), all versions of the QL48T30 converters pass the re-
quirements of Class B conducted emissions per EN55022
and FCC, and meet at a minimum, Class A radiated emis-
sions per EN 55022 and Class B per FCC Title 47CFR, Part
15-J. Please contact Power-One Applications Engineering
for details of this testing.
MAR 26, 2003 revised to NOV 13, 2006
Page 7 of 14
www.power-one.com
相关PDF资料
PDF描述
QLS08ZH-NT DC/DC QTR BRICK 96W 12V OUT
QLS25ZD DC/DC QTR BRICK 63W 2.5V OUT
QLS30ZA DC/DC QTR BRICK 45W 1.5V OUT
QM034D106MAT2A CAP CER 10UF 4V 20% X5R 0603
QM48S40033-NS00 DC/DC QTR BRICK 132W 3.3V SMD
相关代理商/技术参数
参数描述
QL48T30012-NBA0G 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.2V 30A - Bulk
QL48T30012-NBAP 制造商:Power-One 功能描述:DCDC - Bulk
QL48T30012-NBAPG 制造商:Power-One 功能描述:DCDC,HAZMAT - Bulk
QL48T30012-NBB0 功能描述:CONV DC-DC 48V IN 1.2V OUT 36W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:QL48 标准包装:5 系列:*
QL48T30012-NBBP 制造商:Power-One 功能描述:DCDC - Bulk