参数资料
| 型号： | QSE-080-01-F-D-A-RT1 |
| 厂商： | Samtec Inc |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | CONN RCPT HI-SPEED DUAL 160POS |
| 标准包装： | 1 |
| 系列： | QStrip® QSE |
| 连接器类型： | 插座，中央带触点 |
| 位置数： | 160 |
| 间距： | 0.031"（0.80mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨，接地母线（板），屏蔽 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 闪光 |
| 包装： | 管件 |
| 配接层叠高度： | 5mm，8mm，11mm，16mm，19mm，25mm |
| 板上方高度： | 0.128"（3.25mm） |
| 配套产品： | QTE-080-01-F-D-A-RT1-ND - CONN HEADER HI-SPEED DUAL 160POS |
.0060 0.152 REF
No OF POSITIONS
-020, -040, -060
*-080, *-100 (PER ROW)
(*= SEE NOTES 12 & 17)
LEAD STYLE
-01: .1280[3.251]
PLATING SPECIFICATION
(SEE NOTES 8, 11 & 13)
-F: 3μ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C-126-21-F, T-1G2-01-F)
(SEE NOTE 8)
-L: 10μ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C-126-21-L, T-1G2-01-L)
-H: 30μ" GOLD IN CONTACT AREA,
3μ" GOLD ON TAIL
(USE C-126-21-H, T-1G2-01-G)
-C: 50μ" ELECTRO POLISHED SELECTIVE
GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE C-126-21-C, T-1G2-01-L)
-STL: 30μ" SELECTIVE GOLD IN CONTACT
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-STL, T-1G2-01-STL)
-FTL: 3μ" SELECTIVE GOLD INCONTACT
ROW SPECIFICATION
-D: DOUBLE
(USE QSE-20-XX-D-XX)
REVISION BE
DO NOT
SCALE FROM
THIS PRINT
(*= SEE NOTES 12 & 17)
.7875 20.003 (TYP)
19 EQ. SPCS
@ .0315 [0.800]
=.599[15.20]
02 (TYP)
.245 6.22
REF
01
.0975 2.477
REF
.0225 0.571
REF
(*= SEE NOTES 12 & 17)
C
"A" REF
.6250 15.875
REF
QSE-20-01-D-XX-A
"A"
SEE NOTE 15
.285 7.24
REF
.150 3.81
REF
QSE-XXX-01-XXX-D-XXX
OPTION
-A: ALIGNMENT PINS
(USE QSE-20-XX-D-XX-A)
(NOT AVAILABLE WITH -LC OPTION)
-LC: LOCKING CLIPS(SEE NOTE 14)
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A OPTION)
-GP: GUIDE POSTS (SEE FIG 4, SHT 3)
(USE QSE-20-01-D-XX-X-GP)
(T & R PACKAGING: 40 POS MAX)
-K: POLYIMIDE FILM
(USE K-DOT-.325-.450-.005)
(SEE FIG 3, SHT 2)
-TR: TAPE & REEL (60 POS MAX)
(SEE FIG 8, SHT 5)
(40 POS MAX -GP OPTION)
-FL: FRICTION LOCKS
(SEE FIG 5, SHT 3)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION OPTION
(MUST USE -A OPTION)
(USE QSE-20-01-D-XX-A-RT1 &
SUB-SC-05-01-FF)
(SEE FIG 6, SHT 4)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -100 POS)
-L: LATCHING OPTION (40 POS MAX)
(SEE FIG 7, SHT 4)
(MUST USE -A OPTION)
(NOT AVAILABLE WITH -LC, -GP, -FL,
OR -RT1)
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-FTL, T-1G2-01-FTL)
-LTL: 10μ" SELECTIVE GOLD IN CONTACT
AREA, TIN LEAD (90/10 ±5%) ON TAIL
(USE C-126-21-LTL, T-1G2-01-LTL)
-S: 30μ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C-126-21-S, T-1G2-01-L) No OF BANKS
.725 18.42
REF
.120 3.05
.1280 - .0010 3.251 - 0.025
.165 +-.005 4.19 +-0.13
SEE TABLE 1
TOLERANCES ARE:
.XX: .01[.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005[.13]
PHONE: 812-944-6733 FAX: 812-948-5047
.XXXX: .0020[.051]
e-Mail info@SAMTEC.com code 55322
CONTACT: PHOS BRONZE
QSE-XXX-01-XXX-D-XXX
GROUND PLANE: PHOS BRONZE
.038 0.95 "A"
REF
"B" REF
T-1G2-01-XXX
CL
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM CONTACT RETENTION: 8 OZ
3. MINIMUM GROUND PLANE RETENTION: 8 OZ
4. PARTS ARE MOLDED TO POSITION.
5. DELETED.
6. MAXIMUM VARIANCE: .002[0.51].
7. DIMENSION APPLIES TO CONTACTS & GROUND PLANE.
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING, -G PLATED GROUND
PLANE CAN BE SUBSTITUTED FOR -F PLATED GROUND PLANE.
9. GROUND PLANE PRESS HEIGHT MUST BE .003 [0.08] LESS THAN THE MAX HEIGHT
OR .001 [0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.
10. MINIMUM SUB-SC-05-01-XX RETENTION: 1 LB IN BODY.
11. MAY SUB C-126-01-XXX FOR C-126-21-XXX.
12. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
13. FOR -080, -100 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.
14. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT.SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
15. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.
16. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
.035 0.89 REF
.017±.005 0.43±0.13
REF (SEE NOTE 16)
.0030 0.076 REF
C
.105 2.67
REF
.064 1.62 REF
.007 0.18 REF
FIG 1 SECTION "A"-"A"
-A: ALIGNMENT PIN OPTION
(QSE-060-01-XXX-D-A SHOWN)
UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 DESCRIPTION:
C
+.0030 +0.076
(SEE NOTE 6 & 7)
C
.295 7.49
C-126-21-XXX
(SEE NOTE 13)
INSULATOR: LCP, UL94V-0; COLOR: BLACK .8mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO.
C:\EnterpriseVault\DWG\MISC\MKTG\QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW BY: ERIC M 05/20/1999 SHEET 1 OF 5
相关PDF资料 |
PDF描述 |
|---|---|
| QSH-150-01-L-D-A | CONN RCPT HI-SPD .5MM 300POS DL |
| QSS-016-01-L-D-DP-A | CONN RCPT 32POS DUAL .635MM SMD |
| QSS-050-01-F-D-A-K | CONN RCPT 100POS DUAL .635MM SMD |
| QSS-075-01-L-D-EM2 | CONN RCPT 150POS DUAL .635MM SMD |
| QSS-100-01-L-D-RA-WT | CONN RCPT 200POS DUAL .635MM SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| QSE-080-01-F-D-A-RT1-K | 制造商:Samtec Inc 功能描述:.8MM DOUBLE ROW MI SOCKET ASSEMBLY - Bulk |
| QSE-080-01-F-D-EM2 | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 160 POS 0.8MM SLDR ST EDGE MNT - Bulk |
| QSE-080-01-F-D-EM3 | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 160 POS 0.8MM SLDR ST EDGE MNT - Bulk |
| QSE-080-01-F-D-GP | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 160 POS 0.8MM SLDR ST SMD - Bulk |
| QSE-080-01-F-D-K | 制造商:Samtec Inc 功能描述:.8MM DOUBLE ROW MI SOCKET ASSEMBLY - Bulk |
发布紧急采购，3分钟左右您将得到回复。