参数资料
| 型号： | QTE-080-03-L-D-A |
| 厂商： | Samtec Inc |
| 文件页数： | 1/6页 |
| 文件大小： | 0K |
| 描述： | CONN HEADER HI-SPEED DUAL 160POS |
| 产品目录绘图： | QTE Series Header |
| 特色产品： | Q Strip? High Speed Mezzanine |
| 标准包装： | 1 |
| 系列： | QStrip® QTE |
| 连接器类型： | 接头，外罩触点 |
| 位置数： | 160 |
| 间距： | 0.031"（0.80mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨，接地母线（板） |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 10µin（0.25µm） |
| 包装： | 托盘 |
| 配接层叠高度： | 11mm |
| 板上方高度： | 0.404"（10.27mm） |
| 产品目录页面： | 116 (CN2011-ZH PDF) |
| 配套产品： | QSE-080-01-L-D-A-K-ND - CONN RCPT HI-SPEED DUAL 160POS QSE-080-01-F-D-A-ND - CONN RCPT HI-SPEED DUAL 160POS SAM8126-ND - CONN RCPT HI-SPEED DUAL 160POS |
| 其它名称： | SAM8142 |
REVISION BY
QTE-XXX-XX-XXX-D-XXX
-A: ALIGNMENT PINS
-LC: LOCKING CLIPS(SEE NOTE 12)
(USE LC-08-TM-01)
-K: POLYIMIDE FILM
.7878 20.009 REF
.2350 5.969
REF
-F: FLASH GOLD WITH MATTE TIN TAILS
(USE T-1SXX-XX-F, T-1G1-XX-F)
REF
(SEE NOTE 07)
-L: LIGHT GOLD WITH MATTE TIN TAILS
(USE T-1SXX-XX-L, T-1G1-XX-L)
FIG 1
-H: HEAVY GOLD WITH FLASH GOLD TAILS
(USE T-1SXX-XX-H, T-1G1-XX-G)
-C: ELECTRO-POLISHED SELECTIVE
(USE T-1SXX-XX-C, T-1G1-XX-L)
-STL: SELECTIVE TIN LEAD
(USE T-1SXX-XX-STL, T-1G1-XX-STL)
-FTL: SELECTIVE TIN LEAD
T-1G1-XX-XXX
(USE T-1SXX-XX-FTL, T-1G1-XX-FTL)
"A"
"A" - .001
T-1SXX-XX-XXX
(SEE TABLE 1)
(SEE NOTE 9)
-D: DOUBLE (USE QTE-20-XX-D-XX
& QTEH-20-XX-D-XX)
C C2-B-DC
No OF BANKS
SEE TABLE 2
LC-08-TM-01
(((No OF POSITIONS / 20) x .7875 [20.003]) - .060 [1.52])
.003 [.08]
.0375 0.953 REF
1. REPRESENTS A CRITICAL DIMENSION.
-LC: LOCKING CLIP OPTION SHOWN
2. MINIMUM TERMINAL RETENTION: 8 OZ. SECTION "A"-"A"
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [.05].
BY
-A: ALIGNMENT PIN OPTION SHOWN
(STYLES -01, -02 & -03)
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [.3] 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com code 55322
DONOT
SCALE FROM
THIS PRINT
.0360 0.914
REF
.155 3.94 REF
(SEE NOTE 13)
.035 0.88
REF
.055 1.40
.010 0.25 REF
R
.0375 0.953
REF
01
02
19 EQ SPACES (MUST USE -A OPTION)
"A"
No OF POSITIONS OPTION
-020, -040, -060,
*-080, *-100
(PER ROW)
C C1-A-DC * (SEE NOTE 11)
(No OF POSITIONS / 20) x .7875 [20.003] LEAD STYLE (USE K-DOT-.276-.375-.005, SEE FIG. 2)
-01: .1680 [4.267] (N/A ON STYLE -07 & -08)
-02: .2861 [7.267] -TR: TAPE & REEL (60 POS. MAX)
-03: .4042 [10.267] (40 FOR -GP OPTION)
-04: .6010 [15.265] (N/A ON STYLE -05, -06, -07, & -08)
-05: .7190 [18.263] -GP: GUIDE POSTS (SEE FIG. 3, SHT. 2)
-06: .8370 [21.260] (AVAILABLE ON -01 ONLY)
-07: .9540 [24.231] (USE QTE-20-01-D-XX-GP)
-08: 1.1510 [29.260] (T & R PACK: 40 POS. MAX.)
-09: .5220 [13.258] -SD: SCREW DOWN (SEE FIGURE 4, SHEET 2)
-10: .5606 [14.239] (AVAILABLE ON -01 ONLY)
PLATING SPECIFICATION (USE QTE-20-01-D-XX-SD)
.6450 16.383 -FL: FRICTION LOCKS (SEE FIG. 8, SHEET 4)
(ONLY AVAILABLE ON -01 & -02)
(NOT AVAILABLE WITH -GP, -SD)
.0080 0.203 REF -RT1: RETENTION OPTION (SEE FIG. 9, SHEET 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
@ .0315 [.800] (USE QTE-20-01-D-XX-A-RT1 & T-1R36-01-F)
QTE-060-01-XXX-D-LC SHOWN (NOT AVAILABLE WITH -LC, -GP, -SD, OR -FL)
(NOT AVAILABLE ON -100 POS)
-L: LATCHING OPTION (40 POS. MAX.)
QTE-20-XX-D-XX (SEE FIG. 11, SHEET 6) (MUST USE -A OPTION)
(AVAILABLE ON -01 ONLY)
(NOT AVAILABLE WITH -LC, -GP, -SD, -FL,
OR -RT1)
+.003
"B" REF ROW SPECIFICATION
C C3-B-CP
.7450 18.923
REF .0370 0.940 REF
NOTES: .280 7.11 REF
.0150 0.381 REF
C
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
QTE-20-XX-D-XX-A
6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.
7. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F.
8. NOTE DELETED.
9. GROUND PLANE PRESS HEIGHT MUST BE .003[.08] LESS THAN THE MAX HEIGHT
OR .001[.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
10. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
.0350 0.889 REF 11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT
SAMTEC INTERCONNECT PROCESSING GROUP.
(((No OF POSITIONS / 20) x .7875 [20.003]) - .060 [1.52]) 12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS
REF NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION."
C12-A,I-MV C 13. ROW TO ROW MIN IS .152, PIN CAN EXTEND PAST WALL .003 MAX.
UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
QTE-XXX-XX-XXX-D-XXX
(SEE NOTE 11)
MATERIAL: DO NOT SCALE DRAWING
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
F:\DWG\MISC\MKTG\QTE-XXX-XX-X-D-XXX-MKT.SLDDRW
SHEET SCALE: 1:0.8
DESCRIPTION:
.8mm DOUBLE ROW HS TERMINAL ASSEMBLY
DWG. NO.
BY: DEAN P 09-14-2010 SHEET 1 OF 6
相关PDF资料 |
PDF描述 |
|---|---|
| QTH-060-02-F-D-A | CONN HEADER 120POS .020" SMT GLD |
| QTH-150-02-L-D-A | CONN HEADER HS .5MM 300POS DL AU |
| QTS-016-04-L-D-DP-A | CONN HEADER 32POS .635MM SMT |
| QTS-075-01-L-D-RA-WT | CONN HEADER 150POS .635MM T/H |
| QTS-100-03-L-D-A | CONN HEADER 200POS .635MM SMT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| QTE-080-03-L-D-A-K | 制造商:Samtec Inc 功能描述:CONN MICRO HS TERM STRP HDR 160 POS 0.8MM SLDR ST SMD - Bulk 制造商:Samtec Inc 功能描述:.8mm DOUBLE ROW MI TERMINAL ASSEMBLY |
| QTE-080-03-L-D-A-K-TY | 制造商:Samtec Inc 功能描述:CONN MICRO HS TERM STRP HDR 160 POS 0.8MM SLDR ST SMD - Bulk |
| QTE-080-03-L-D-K | 制造商:Samtec Inc 功能描述:.8MM DOUBLE ROW MI TERMINAL ASSEMBLY - Bulk |
| QTE-080-03-L-D-LC | 制造商:Samtec Inc 功能描述:CONN MICRO HS TERM STRP HDR 160 POS 0.8MM SLDR ST SMD - Bulk |
| QTE-080-04-C-D | 制造商:Samtec Inc 功能描述:.8MM DOUBLE ROW MI TERMINAL ASSEMBLY - Bulk |
发布紧急采购，3分钟左右您将得到回复。