参数资料
| 型号： | QTH-040-01-L-D-DP-A |
| 厂商： | Samtec Inc |
| 文件页数： | 2/9页 |
| 文件大小： | 0K |
| 描述： | CONN HEADER 80POS .020" SMT GOLD |
| 标准包装： | 1 |
| 系列： | QStrip® QTH |
| 连接器类型： | 差分对阵列，公 |
| 位置数： | 80 |
| 间距： | 0.020"（0.50mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨，接地母线（板） |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 10µin（0.25µm） |
| 包装： | 托盘 |
| 板上方高度： | 0.160"（4.06mm） |
| 配套产品： | QSH-040-01-L-D-DP-A-K-ND - CONN RECPT 80POS 0.5MM SMT QSH-040-01-L-D-DP-A-ND - CONN RECPT 80POS .020" SMT GOLD QSH-040-01-F-D-DP-ND - CONN RECPT 80POS .020" SMT GOLD |
Product Specification
Series: QSH/QTH High Speed Socket 0.5 mm pitch
5.0 ENVIRONMENTAL
5.1 Thermal Aging per EIA-364-17
5.1.1 No Evidence of Physical Damage seen --- PASS
5.1.2 Change in Contact LLCR not to exceed +15.0 milli-Ohms (L- plating) --- PASS
5.1.3 Change in Ground LLCR not to exceed +5.0 milli-Ohms (L- plating) --- PASS
5.1.4 Change in Contact LLCR After Thermal and Gas Tight not to exceed +15.0 milli-
Ohms (L- plating) --- PASS
5.1.5 Change in Ground LLCR After Thermal and Gas Tight not to exceed +5.0 milli-
Ohms (L- plating) --- PASS
5.1.6 Test Conditions
5.1.6.1 105 degrees C
5.1.6.2 300 hours
5.2 Cyclic Humidity per EIA-364-31
5.2.1 No Evidence of Physical Damage seen --- PASS
5.2.2 Insulation Resistance > 5000 Meg Ohms --- PASS
5.2.3 No evidence of Breakdown or Arcing when applying 750 VAC --- PASS
5.2.4 Change in LLCR not to exceed +15.0 milli-Ohms (L- plating) --- PASS
5.2.5 Test Conditions
5.2.5.1 Cyclic 25 degrees C to 65 degrees C for 240 hours, at 90% to 95% RH
5.2.5.2 Time Condition "B" (240 hours) for Method III, excluding sub-cycle 7A
and 7B
5.3 Thermal Shock per EIA-364-32
5.3.1 No Evidence of Physical Damage seen --- PASS
5.3.2 Change in Signal LLCR not to exceed +15 mOhm --- PASS
5.3.3 Change in GND LLCR not to exceed +5 mOhm --- PASS
5.3.4 Test Conditions
5.3.4.1 # Thermal Cycles: 5
5.3.4.2 Hot Temperature: 85 degrees C +3 degrees C/-0 degrees C
5.3.4.3 Cold Temperature: -55 degrees C +0 degrees C/-3 degrees C
5.3.4.4 Dwell/Configuration: 30 Minutes, Mated and Mounted
5.3.4.5 Hot/Cold Transition Instantaneous
5.4 Mechanical Shock per EIA-364-27
5.4.1 No Evidence of Physical Damage seen --- PASS
5.4.2 Test Conditions
5.4.2.1 Test Condition: Test Condition "A"
5.4.2.2 Peak Value: 50 G
5.4.2.3 Duration: 11.0 milliSec
5.4.2.4 Waveform: Half Sine
5.4.2.5 # Shocks/Direction 3 Shocks/3 Axes (18 total)
Revision: C
Rev Approved by: JTA
Spec Approved by: DLD
Spec Checked by:
? Samtec, Inc.
Rev Date: 06/11/2012
Page 2
相关PDF资料 |
PDF描述 |
|---|---|
| P50-050SG-SR1-EA | CONN SOCKET 50POS R/A .050" GOLD |
| 77061270 | RES ARRAY 27 OHM 5 RES 6-SIP |
| AE26A-50-ND | CABLE 26COND GRAY 50' RIBBON |
| 4310R-101-682LF | RES ARRAY 6.8K OHM 9 RES 10-SIP |
| FSI-120-10-L-D-E-AD | CONN INTERFACE ONE PC 1MM 40POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| QTH-040-01-L-D-DP-A-GP | 制造商:Samtec Inc 功能描述:.5MM DOUBLE ROW MI SOCKET ASSEMBLY - Bulk |
| QTH-040-01-L-D-DP-A-K | 制造商:Samtec Inc 功能描述:CONN DP HDR 80 POS 1.5MM SLDR ST SMD - Bulk |
| QTH-040-01-L-D-DP-A-K-TR | 制造商:Samtec Inc 功能描述:CONN DP HDR 80 POS 1.5MM SLDR ST SMD - Tape and Reel 制造商:Samtec Inc 功能描述:Conn Differential Pair HDR 80 POS 1.5mm Solder ST SMD T/R |
| QTH-040-01-L-D-DP-A-K-TR 125 | 制造商:Samtec Inc 功能描述: |
| QTH-040-01-L-D-DP-A-L-K-TR | 制造商:Samtec Inc 功能描述:.5MM DOUBLE ROW MI SOCKET ASSEMBLY - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。