- 您现在的位置：买卖IC网 > PDF目录299824 > R1130H241A-T1 (RICOH COMPANY LTD) 2.4 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 PDF资料下载
参数资料
| 型号： | R1130H241A-T1 |
| 厂商： | RICOH COMPANY LTD |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| 封装： | SOT-89, 5 PIN |
| 文件页数： | 17/24页 |
| 文件大小： | 739K |
| 代理商： | R1130H241A-T1 |
24
4317K–AVR–03/2013
AT90PWM2/3/2B/3B
When the write access time has elapsed, the EEWE bit is cleared by hardware. The user soft-
ware can poll this bit and wait for a zero before writing the next byte. When EEWE has been set,
the CPU is halted for two cycles before the next instruction is executed.
Bit 0 – EERE: EEPROM Read Enable
The EEPROM Read Enable Signal EERE is the read strobe to the EEPROM. When the correct
address is set up in the EEAR Register, the EERE bit must be written to a logic one to trigger the
EEPROM read. The EEPROM read access takes one instruction, and the requested data is
available immediately. When the EEPROM is read, the CPU is halted for four cycles before the
next instruction is executed.
The user should poll the EEWE bit before starting the read operation. If a write operation is in
progress, it is neither possible to read the EEPROM, nor to change the EEAR Register.
The calibrated Oscillator is used to time the EEPROM accesses. Table 6-2 lists the typical pro-
gramming time for EEPROM access from the CPU.
The following code examples show one assembly and one C function for writing to the
EEPROM. The examples assume that interrupts are controlled (e.g. by disabling interrupts glob-
ally) so that no interrupts will occur during execution of these functions. The examples also
assume that no Flash Boot Loader is present in the software. If such code is present, the
EEPROM write function must also wait for any ongoing SPM command to finish.
Table 6-2.
EEPROM Programming Time.
Symbol
Number of Calibrated RC Oscillator Cycles
Typ Programming Time
EEPROM write
(from CPU)
26368
3.3 ms
相关PDF资料 |
PDF描述 |
|---|---|
| R1130H241A-T2 | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| R1130H241B-T1 | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| R1130H241B-T2 | 2.4 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| R1130H251A-T1 | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
| R1130H251A-T2 | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.49 V DROPOUT, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R1130HXXXX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Power Management ICs |
| R1131 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
| R11-3-1.00A-B06EV-S | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 1Pole 1A |
| R11-3-1.00A-B101EV-S | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 1Pole 1A |
| R11-3-10.0A-29865-1 | 制造商:Airpax 功能描述:CIRCUIT BREAKER MAG-HYDR ROCKER 制造商:Sensata Technologies 功能描述:R11-3-10.0A-29865-1 /Pole # 1 /Prod Family: 0213 |
发布紧急采购，3分钟左右您将得到回复。