- 您现在的位置：买卖IC网 > PDF目录299853 > R500CH20DF6 (WESTCODE SEMICONDUCTORS LTD) 4980 A, 2000 V, SCR PDF资料下载
参数资料
| 型号： | R500CH20DF6 |
| 厂商： | WESTCODE SEMICONDUCTORS LTD |
| 元件分类： | 晶闸管 |
| 英文描述： | 4980 A, 2000 V, SCR |
| 封装： | 101A281, 3 PIN |
| 文件页数： | 5/13页 |
| 文件大小： | 357K |
| 代理商： | R500CH20DF6 |
13
IDT72V3626/72V3636/72V3646 CMOS 3.3V Triple Bus SyncFIFOTM
with Bus-Matching 256x36x2, 512x36x2, 1,024x36x2
COMMERCIALTEMPERATURERANGE
IDT72V3626/72V3636/72V3646 CMOS 3.3V TRIPLE BUS SyncFIFOTM
WITH BUS-MATCHING 256 x 36 x 2, 512 x 36 x 2, 1,024 x 36 x 2
TABLE 5 — FIFO1 FLAG OPERATION (IDT Standard and FWFT modes)
TABLE 6 — FIFO2 FLAG OPERATION (IDT Standard and FWFT modes)
Synchronized
Number of Words in FIFO Memory
(1,2)
to CLKB
to CLKA
IDT72V3626(3)
IDT72V3636(3)
IDT72V3646(3)
EFB/ORB
AEB
AFA
FFA/IRA
00
0
L
H
1 to X1
H
L
H
(X1+1) to [256-(Y1+1)]
(X1+1) to [512-(Y1+1)]
(X1+1) to [1,024-(Y1+1)]
H
(256-Y1) to 255
(512-Y1) to 511
(1,024-Y1) to 1,023
H
L
H
256
512
1,024
H
L
NOTES:
1. When a word loaded to an empty FIFO is shifted to the output register, its previous FIFO memory location is free.
2. Data in the output register does not count as a "word in FIFO memory". Since in FWFT mode, the first word written to an empty FIFO goes unrequested to the output register (no read operation
necessary), it is not included in the FIFO memory count.
3. X1 is the almost-empty offset for FIFO1 used by
AEB. Y1 is the almost-full offset for FIFO1 used by AFA. Both X1 and Y1 are selected during a FIFO1 reset or port A programming.
4. The ORB and IRA functions are active during FWFT mode; the
EFB and FFA functions are active in IDT Standard mode.
NOTES:
1. When a word loaded to an empty FIFO is shifted to the output register, its previous FIFO memory location is free.
2. Data in the output register does not count as a "word in FIFO memory". Since in FWFT mode, the first word written to an empty FIFO goes unrequested to the output register (no read operation
necessary), it is not included in the FIFO memory count.
3. X2 is the almost-empty offset for FIFO2 used by
AEA. Y2 is the almost-full offset for FIFO2 used by AFC. Both X2 and Y2 are selected during a FIFO2 reset or port A programming.
4. The ORA and IRC functions are active during FWFT mode; the
EFA and FFC functions are active in IDT Standard mode.
Synchronized
Number of Words in FIFO Memory
(1,2)
to CLKA
to CLKC
IDT72V3626(3)
IDT72V3636(3)
IDT72V3646(3)
EFA/ORA
AEA
AFC
FFC/IRC
00
0
L
H
1 to X2
H
L
H
(X2+1) to [256-(Y2+1)]
(X2+1) to [512-(Y2+1)]
(X2+1) to [1,024-(Y2+1)]
H
(256-Y2) to 255
(512-Y2) to 511
(1,024-Y2) to 1,023
H
L
H
256
512
1,024
H
L
SYNCHRONIZED FIFO FLAGS
Each FIFO is synchronized to its port clock through at least two flip-flop
stages. This is done to improve flag signal reliability by reducing the probability
of metastable events when CLKA operates asynchronously with respect to
either CLKB or CLKC.
EFA/ORA,AEA, FFA/IRA,andAFAaresynchronized
to CLKA.
EFB/ORB and AEB are synchronized to CLKB. FFC/IRC and AFC
are synchronized to CLKC. Tables 5 and 6 show the relationship of each port
flag to FIFO1 and FIFO2.
EMPTY/OUTPUT READY FLAGS (
EFA/ORA, EFB/ORB)
These are dual purpose flags. In the FWFT mode, the Output Ready
(ORA, ORB) function is selected. When the Output Ready flag is HIGH, new
data is present in the FIFO output register. When the Output Ready flag is
LOW, the previous data word is present in the FIFO output register and
attempted FIFO reads are ignored.
IntheIDTStandardmode,theEmptyFlag(
EFA,EFB)functionisselected.
When the Empty Flag is HIGH, data is available in the FIFO’s RAM memory
for reading to the output register. When the Empty Flag is LOW, the previous
data word is present in the FIFO output register and attempted FIFO reads are
ignored.
The Empty/Output Ready flag of a FIFO is synchronized to the port clock
that reads data from its array. For both the FWFT and IDT Standard modes, the
FIFO read pointer is incremented each time a new word is clocked to its output
register. The state machine that controls an Output Ready flag monitors a write
pointer and read pointer comparator that indicates when the FIFO memory
status is empty, empty+1, or empty+2.
In FWFT mode, from the time a word is written to a FIFO, it can be shifted
to the FIFO output register in a minimum of three cycles of the Output Ready
flag synchronizing clock. Therefore, an Output Ready flag is LOW if a word in
memory is the next data to be sent to the FlFO output register and three cycles
of the port clock that reads data from the FIFO have not elapsed since the time
thewordwaswritten.TheOutputReadyflagoftheFIFOremainsLOWuntilthe
thirdLOW-to-HIGHtransitionofthesynchronizingclockoccurs,simultaneously
forcing the Output Ready flag HIGH and shifting the word to the FIFO output
register.
In IDT Standard mode, from the time a word is written to a FIFO, the Empty
Flagwillindicatethepresenceofdataavailableforreadinginaminimumoftwo
cyclesoftheEmptyFlagsynchronizingclock.Therefore,anEmptyFlagisLOW
if a word in memory is the next data to be sent to the FlFO output register and
twocyclesoftheportClockthatreadsdatafromtheFIFOhavenotelapsedsince
the time the word was written. The Empty Flag of the FIFO remains LOW until
the second LOW-to-HIGH transition of the synchronizing clock occurs,forcing
the Empty Flag HIGH; only then can data be read.
A LOW-to-HIGH transition on an Empty/Output Ready flag synchronizing
clockbeginsthefirstsynchronizationcycleofawriteiftheclocktransitionoccurs
attimetSKEW1orgreaterafterthewrite.Otherwise,thesubsequentclockcycle
can be the first synchronization cycle (see Figure 16, 17, 18 and 19).
相关PDF资料 |
PDF描述 |
|---|---|
| R500CH20DF7 | 4980 A, 2000 V, SCR |
| R500CH20DF8 | 4980 A, 2000 V, SCR |
| R500CH20DF9 | 4980 A, 2000 V, SCR |
| R500CH20DW0 | 4980 A, 2000 V, SCR |
| R500CH20DW1 | 4980 A, 2000 V, SCR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| R500L | 制造商:Mallory Sonalert Products Inc 功能描述:Res Wirewound POT 500 Ohm 10% 3W 1(Elec)/1(Mech)Turn 6.35mm (30.96 X 32.54mm) Solder Lug Panel Mount |
| R500M | 制造商:Omron Corporation 功能描述: |
| R500-PS-V | 制造商:Thomas & Betts 功能描述:NON-INS PRL SPLICE, 500 MCM, CMA 47 制造商:Thomas & Betts 功能描述:Splice Terminal 36.52mm 33.78mm Tin |
| R-500-W/FOAM ORG | 功能描述:存储箱与外壳 DISC MFG 5/01 12.0X13.0X6.0 ORG RoHS:否 制造商:Tektronix 颜色:Black 材料:Polypropylene 尺寸:23.25 in L x 20.75 in W x 9 in H |
| R-500-W/FOAM-BLACK | 功能描述:存储箱与外壳 DISC MFG 5/01 12.0X13.0X6.0 BLACK RoHS:否 制造商:Tektronix 颜色:Black 材料:Polypropylene 尺寸:23.25 in L x 20.75 in W x 9 in H |
发布紧急采购，3分钟左右您将得到回复。