收藏本站
参数资料
型号： R5F6418JADFE
元件分类： 微控制器/微处理器
英文描述： MICROCONTROLLER, PQFP176
封装： 24 X 24 MM, 0.50 MM PITCH, PLASTIC, LQFP-176
文件页数： 24/128页
文件大小： 922K
代理商： R5F6418JADFE
121
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
16.11.8 TIMSK1 – Timer/Counter1 Interrupt Mask Register
Bit 7, 6 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit 5 – ICIE1: Timer/Counter1, Input Capture Interrupt Enable
When this bit is written to one, and the I-flag in the status register is set (interrupts globally enabled), the Timer/Counter1
input capture interrupt is enabled. The corresponding interrupt vector (See Section 12. “Interrupts” on page 50) is executed
when the ICF1 flag, located in TIFR1, is set.
Bit 4, 3 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit 2 – OCIE1B: Timer/Counter1, Output Compare B Match Interrupt Enable
When this bit is written to one, and the I-flag in the status register is set (interrupts globally enabled), the Timer/Counter1
output compare B match interrupt is enabled. The corresponding interrupt vector (See Section 12. “Interrupts” on page 50) is
executed when the OCF1B flag, located in TIFR1, is set.
Bit 1 – OCIE1A: Timer/Counter1, Output Compare A Match Interrupt Enable
When this bit is written to one, and the I-flag in the status register is set (interrupts globally enabled), the Timer/Counter1
output compare A match interrupt is enabled. The corresponding interrupt vector (See Section 12. “Interrupts” on page 50) is
executed when the OCF1A flag, located in TIFR1, is set.
Bit 0 – TOIE1: Timer/Counter1, Overflow Interrupt Enable
When this bit is written to one, and the I-flag in the status register is set (interrupts globally enabled), the Timer/Counter1
overflow interrupt is enabled. The corresponding interrupt vector (See Section 12. “Interrupts” on page 50) is executed when
the TOV1 flag, located in TIFR1, is set.
16.11.9 TIFR1 – Timer/Counter1 Interrupt Flag Register
Bit 7, 6 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit 5 – ICF1: Timer/Counter1, Input Capture Flag
This flag is set when a capture event occurs on the ICP1 pin. When the input capture register (ICR1) is set by the WGM13:0
to be used as the TOP value, the ICF1 flag is set when the counter reaches the TOP value.
ICF1 is automatically cleared when the input capture interrupt vector is executed. Alternatively, ICF1 can be cleared by
writing a logic one to its bit location.
Bit 4, 3 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit
7
6
5
4
32
10
(0x6F)
–
ICIE1
–
OCIE1B
OCIE1A
TOIE1
TIMSK1
Read/Write
R
R/W
R
R/W
Initial Value
0
Bit
765
43210
0x16 (0x36)
––
ICF1
––
OCF1B
OCF1A
TOV1
TIFR1
Read/Write
R
R/W
R
R/W
Initial Value
000
00000
相关PDF资料
PDF描述
R5F64200LFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64200JFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64201JFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64201KFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F6420FLFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
R5F6418JANFD 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JANFE 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JANFE_12 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JAPFD 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JAPFE 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*