
REJ03B0244-0030 Rev.0.30 Feb 14, 2008
Page 3 of 108
Under development
Preliminary Specification
Specifications in this preliminary version are subject to change.
R32C/134 Group
1. Overview
Note:
1.
FlexRay is a trademark of Daimler AG.
Table 1.2
R32C/134 Group Performance (2/2)
Unit
Function
Performance
Serial Inter-
face
UART0 to UART4 Asynchronous/synchronous serial interface × 5 channels
I2C-bus (UART0 to UART2)
Special mode 2 (UART0 to UART2)
A/D Converter
10-bit resolution × 34 channels
Sample & hold functionality integrated
Self Test/Open-Circuit Detection Assist
D/A Converter
8-bit resolution × 2
CRC Calculator
CRC-CCITT (X16 + X12 + X5 + 1)
X-Y Converter
16 bits ×16 bits
Intelligent I/O
Time measurement (input capture): 16 bits × 16
Digital debounce circuit contained
Waveform generation (output compare): 16 bits × 16
Phase shift waveform output mode contained
Serial Bus Interface
2 channels
Synchronous serial communication mode
4-wire serial bus mode
Programmable character length: 8 to 16 bits
I2C-bus interface mode
CAN Module
3 channels
CAN functionality compliant with ISO11898-1
32 mailboxes
1 module (2 channels)
Compliant with FlexRay Protocol Specification V2.1
Flash Memory
Programming and erasure supply voltage:
VCC = 5.0 ± 0.5 V, VCC0 = 3.3 ± 0.3 V
Minimum endurance: 1000 erase/program cycles
Read protection: ROM code protect, ID code check
Debugging: On-chip debug, on-board flash re-programming
E2dataFlash
Minimum endurance: 100000 erase/program cycles
Operating Frequency/Supply Volt-
age
60 MHz/VCC = 4.2 to 5.5 V, VCC0 = 3.0 to 3.6 V
Operating Temperature
-40°C to 85°C (version J)
-40°C to 125°C (version K)
Current Consumption
TBD mA (VCC = 5.0 V, VCC0 = 3.3 V, f(CPU) = 60 MHz)
TBD A (VCC = 5.0 V, VCC0 = 3.3 V, f(XCIN) = 32.768 kHz, Wait
mode)
Package
144-pin plastic molded LQFP (PLQP0144KA-A)