参数资料
型号: RDER72E473K2M1C11A
厂商: Murata Electronics North America
文件页数: 54/57页
文件大小: 0K
描述: CAP CER 0.047UF 250V 10% RADIAL
标准包装: 2,000
系列: RDE
电容: 0.047µF
电压 - 额定: 250V
容差: ±10%
温度系数: X7R
安装类型: 通孔
工作温度: -55°C ~ 125°C
应用: 通用
封装/外壳: 径向
尺寸/尺寸: 0.197" L x 0.124" W(5.00mm x 3.15mm)
高度 - 座高(最大): 0.197"(5.00mm)
引线间隔: 0.197"(5.00mm)
包装: 带盒(TB)
引线型: 纽结

! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
! Caution
c ! Caution (Storage and Operating Condition)
C49E.pdf
Mar.12,2014
Operating and storage environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sul?de gas, acid, alkali, salt
or the like are present. Also avoid exposure to
moisture. Before cleaning, bonding or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
c ! Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the V 0 -p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to
use a capacitor with a rated voltage range that includes
these irregular voltages.
equipment. Store the capacitors where the
temperature and relative humidity do not exceed 5
to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months after delivery.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
When DC-rated capacitors are to be used in input circuits
from commercial power source (AC filter), be sure to use
Safety Recognized Capacitors because various
regulations on withstand voltage or impulse withstand
established for all equipment should be taken into
consideration.
Voltage
Positional
Measurement
DC Voltage
V 0 -p
DC+AC Voltage
V 0 -p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a
high-frequency current, pulse current or similar current, it
may have self-generated heat due to dielectric loss. In
the case of "High Dielectric Constant Type Capacitors,"
applied voltage load should be such that self-generated
heat is within 20 °C under the condition where the
capacitor is subjected at an atmosphere temperature of
25 °C. Please contact us if self-generated heat occurs
with "Temperature Compensating Type Capacitors".
When measuring, use a thermocouple of small thermal
capacity -K of ?0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's characteristics
and reliability. Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.
52
3. Fail-Safe
Be sure to provide an appropriate fail-safe function on
your product to prevent a second damage that may be
caused by the abnormal function or the failure of our
product.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
相关PDF资料
PDF描述
GRM32ER61C106KA12L CAP CER 10UF 16V 10% X5R 1210
GRM32ER61A106MA01L CAP CER 10UF 10V 20% X5R 1210
DEHR33F102KN3A CAP CER 1000PF 3.15KV RADIAL
SN74LV4066APWG4 IC SWITCH QUAD 1X1 14TSSOP
SN74LV4066APWE4 IC SWITCH QUAD 1X1 14TSSOP
相关代理商/技术参数
参数描述
RDER72E473K2M1H03A 功能描述:0.047μF 250V 陶瓷电容器 X7R 径向 0.217" 长 x 0.124" 宽(5.50mm x 3.15mm) 制造商:murata electronics north america 系列:RDE 包装:剪切带(CT) 零件状态:有效 电容:0.047μF 容差:±10% 电压 - 额定:250V 温度系数:X7R 安装类型:通孔 工作温度:-55°C ~ 125°C 应用:通用 等级:- 封装/外壳:径向 大小/尺寸:0.217" 长 x 0.124" 宽(5.50mm x 3.15mm) 高度 - 安装(最大值):0.236"(6.00mm) 厚度(最大值):- 引线间距:0.197"(5.00mm) 特性:- 引线形式:成型引线 - 扭结 标准包装:1
RDER72E474K4K1H03B 功能描述:0.47μF 250V 陶瓷电容器 X7R 径向 0.295" 长 x 0.157" 宽(7.50mm x 4.00mm) 制造商:murata electronics north america 系列:RDE 包装:散装 零件状态:有效 电容:0.47μF 容差:±10% 电压 - 额定:250V 温度系数:X7R 安装类型:通孔 工作温度:-55°C ~ 125°C 应用:通用 等级:- 封装/外壳:径向 大小/尺寸:0.295" 长 x 0.157" 宽(7.50mm x 4.00mm) 高度 - 安装(最大值):0.217"(5.50mm) 厚度(最大值):- 引线间距:0.197"(5.00mm) 特性:- 引线形式:成型引线 标准包装:500
RDER72E474K4M1H03A 功能描述:0.47μF 250V 陶瓷电容器 X7R 径向 0.295" 长 x 0.157" 宽(7.50mm x 4.00mm) 制造商:murata electronics north america 系列:RDE 包装:剪切带(CT) 零件状态:有效 电容:0.47μF 容差:±10% 电压 - 额定:250V 温度系数:X7R 安装类型:通孔 工作温度:-55°C ~ 125°C 应用:通用 等级:- 封装/外壳:径向 大小/尺寸:0.295" 长 x 0.157" 宽(7.50mm x 4.00mm) 高度 - 安装(最大值):0.217"(5.50mm) 厚度(最大值):- 引线间距:0.197"(5.00mm) 特性:- 引线形式:成型引线 标准包装:1
RDER72E474K5B1C13B 功能描述:多层陶瓷电容器MLCC - 含引线 0.47uF 250Volts X7R 10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RDER72E474K5E1C13A 功能描述:多层陶瓷电容器MLCC - 含引线 0.47uF 250Volts X7R 10% RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: