- 您现在的位置：买卖IC网 > PDF目录225037 > RH5RI723B-T2 (RICOH COMPANY LTD) 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PDSO5 PDF资料下载
参数资料
| 型号： | RH5RI723B-T2 |
| 厂商： | RICOH COMPANY LTD |
| 元件分类： | 稳压器 |
| 英文描述： | 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PDSO5 |
| 封装： | SOT-89, 5 PIN |
| 文件页数： | 4/24页 |
| 文件大小： | 179K |
| 代理商： | RH5RI723B-T2 |
11
RH5RI
When LxTr is on, the energy PON charged in the inductor is provided by Equation 2 as follows :
PON=
∫
0
ton (VIN IL (t)) dt=
∫
0
ton (VIN2 t/L) dt
=VIN
2 ton2/(2 L)....................................................................................................Equation 2
In the case of the step-up DC/DC converter, the energy is also supplied from the input power source at the time
of OFF.
Thus, POFF =
∫
0
topen(VIN IL (t)) dt=
∫
0
topen (VIN (VOUT–VIN) t/L)dt
=VIN (VOUT–VIN) topen
2/(2 L)
Here, topen=VIN ton/(VOUT–VIN) from Equation 1, and when this is substituted into the above equation.
=VIN
3 ton2/(2 L (VOUT–VIN))............................................................................Equation 3
Input power PIN is (PON+POFF)/T. When this is converted in its entirely to the output.
PIN=(PON+POFF)/T=VOUT IOUT=POUT .........................................................................Equation 4
Equation 5 can be obtained as follows by solving Equation 4 for IOUT by substituting Equation 2 and 3 into
Equation 4 :
IOUT=VIN
2 ton2/(2 L T (VOUT–VIN)
=VIN
2 maxdty2/(20000 fosc L (VOUT–VIN)) ...................................................Equation 5
The peak current which flows through L LxTr SD is
ILmax=VIN ton/L..........................................................................................................Equation 6
Therefore, it is necessary that the setting of the input/output conditions and the selection of peripheral compo-
nents be made with ILmax taken into consideration.
SELECTION OF PERIPHERAL COMPONENTS
The above explanation is directed to the calculation in an ideal case where it is supposed that there is no
energy loss in the external components and LxSW. In an actual case, the maximum output current will be 50
to 80% of the above calculated maximum output current. In particular, care must be taken because VIN is
decreased in an amount corresponding to the voltage reduction caused by LxSW when IL is large or VIN is
small. Furthermore, It is required that with respect to VOUT, Vf of the diode (about 0.3V in the case of a
Schottky type diode) be taken into consideration.
When ILX and VLX exceed their respective ratings, use RH5RI
××2B and RH5RI××3B ICs with the attach-
ment of an external transistor with a low saturation voltage thereto.
HINTS
相关PDF资料 |
PDF描述 |
|---|---|
| RH5RI743B-T2 | 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PDSO5 |
| RH5RI333B-T1 | 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PDSO5 |
| RH5RI543B-T2 | 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PDSO5 |
| RH5RI641B-T1 | 0.25 A SWITCHING REGULATOR, 100 kHz SWITCHING FREQ-MAX, PSSO3 |
| RH5RL32AAT2 | 3.2 V FIXED POSITIVE LDO REGULATOR, 0.053 V DROPOUT, PSSO3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RH5RI731A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| RH5RI732B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| RH5RI733B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| RH5RI741A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| RH5RI742B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
发布紧急采购，3分钟左右您将得到回复。