- 您现在的位置：买卖IC网 > PDF目录10605 > RM12WBP-2P (Hirose Electric Co Ltd)CONN PLUG 2POS W/PIN INSERT PDF资料下载
参数资料
| 型号： | RM12WBP-2P |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 8/16页 |
| 文件大小： | 0K |
| 描述： | CONN PLUG 2POS W/PIN INSERT |
| 标准包装： | 20 |
| 系列： | RM-W |
| 连接器类型： | 插头，公引脚 |
| 位置数： | 2 |
| 外壳尺寸 - 插件： | 12 |
| 安装类型： | 自由悬挂 |
| 端子： | 焊接 |
| 紧固型： | 插销锁 |
| 防护等级： | IP67 - 防尘，防水 |
| 外壳材料，表面处理： | 锌，黄铜，柔韧 PVC，镀铬或镍 |
| 包装： | 散装 |
| 工作温度： | -25°C ~ 85°C |
| 其它名称： | *RM12WBP-2P HR1078 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Plug -- Disassembly / Assembly
Clamp
Bushing
Tightening collar
Insulator body (P)
Contacts
3 min
Washer
Screw
Cable jacket
Conductors Wires
A
B
Cable
Cable
Coupling
Back shell
Back shell
Strain relief clamp
Table 1
Part Name
Number of Contacts
A
B
Tightening ring
RM15WTPZA-ππ
RM15WTPZ-ππ
RM15WTLP-ππ
3
2,4,8,10,12
3
2,4,8,10,12
10,12
6mm
3mm
6mm
3mm
3mm
21mm
21mm
12mm
12mm
25mm
Set screw(2)
Disassembly
1.
2.
3.
4.
5.
1 Fix the plug in the assembly fixture (RM15TP-T01 (CL150-0098-0)), then remove the insulator body (P) and the back shell.
Right-angle plugs have set screws in the tightening ring at 2 locations. Loosen the set screws before removing the back shell.
2 Remove the 2 screws of the strain relief clamp, and then remove the clamp from the tightening collar.
Wiring
1 Assure that the cable outer diameter will fit the strain relief clamp, and is prepared as recommended in Table 1.
It is recommended that the exposed conductors be pre-soldered, to assure easier insertion in the soldering cup.
2 Pass the parts over the cable in the order of: tightening collar, washer, bushing, back shell, and coupling. Refer to the drawings
(above) for assembly orientation of all components.
3 Solder the wires to the contacts of the insulator body (P).
Use of heat-shrink tubing or another insulating media between the soldered contacts is suggested.
Connector Assembly
Straight Plugs
1 Place the completely wired insulator body (P) in the assembly fixture secured in a vise. Insert in the coupling, then back shell. The
back shell should be tightened to a torque of 3 N?m.
Right-angle Plugs
1 Place the completely wired insulator body (P) in an assembly fixture secured by a vise. Insert in the coupling, then back shell (with
tightening ring). When attaching the back shell, orient the cable in the desired direction and fasten the tightening ring to the
insulator body (P) with a torque of 3 N?m. After this, tighten and fix the 2 sets crews with a torque of 0.2 to 0.3 N?m.
Additional assembly recommendations:
In applications where continuous extremely high vibrations may be encountered it is recommended that a thread locking
compound be applied to male threads prior to assembly (Loctite 271 ? manufactured by Henkel Japan K.K. or equivalent)
Waterproof verification - plug assembly
Apply air pressure of 17.6 kPa for 30 seconds from the mating side of the plug assembly. There shall not be any air leakage from
inside the connector when submerged in the water tank.
Precautions
1 Follow the correct assembly sequence, cable preparation and tightening torques.
2 Assure that the applicable cable outer surfaces are free of scratches, oil, grease or any other contamination.
3 Do not use excessive forces or improper tools when assembling or mounting the connectors.
8
相关PDF资料 |
PDF描述 |
|---|---|
| RM12WBP-5S | CONN PLUG 5POS W/SOCKET INSERT |
| MAX3243EEUI+ | IC TXRX RS-232 W/SHTDWN 28TSSOP |
| VE-JTZ-MX-F4 | CONVERTER MOD DC/DC 2V 30W |
| MAX3238EEAI+ | IC TXRX RS-232 TRUE 28-SSOP |
| MAX3237EEAI+ | IC TXRX RS232 1MBPS 28-SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RM12WBP-2P(71) | 功能描述:标准环形连接器 PLUG 2P W/PIN INSERT RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
| RM12WBP-2S | 功能描述:CONN PLUG 2POS W/SOCKET INSERT RoHS:否 类别:连接器，互连式 >> 圆形 系列:RM-W 产品目录绘图:63000 Series 63000 Series Front 63000 Series Side 63000 Series Cable End 63000 Series Assembly In Line 6P Mating Face 标准包装:500 系列:63000 连接器类型:插孔，母插口 位置数:6 外壳尺寸 - 插件:迷你型 DIN 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊接 紧固型:推挽式 方向:带标记 防护等级:- 外壳材料，表面处理:青铜，镀镍 触点表面涂层:- 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:- 工作温度:-40°C ~ 85°C 其它名称:275-1037 |
| RM12WBP-2S(71) | 功能描述:标准环形连接器 PLUG 2P W/SOC INSERT RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
| RM12WBP-3P | 功能描述:CONN PLUG 3POS W/PIN INSERT RoHS:否 类别:连接器，互连式 >> 圆形 系列:RM-W 产品目录绘图:63000 Series 63000 Series Front 63000 Series Side 63000 Series Cable End 63000 Series Assembly In Line 6P Mating Face 标准包装:500 系列:63000 连接器类型:插孔，母插口 位置数:6 外壳尺寸 - 插件:迷你型 DIN 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊接 紧固型:推挽式 方向:带标记 防护等级:- 外壳材料，表面处理:青铜，镀镍 触点表面涂层:- 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:- 工作温度:-40°C ~ 85°C 其它名称:275-1037 |
| RM12WBP-3P(71) | 功能描述:标准环形连接器 PLUG 3P W/PIN INSERT RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
发布紧急采购，3分钟左右您将得到回复。