- 您现在的位置：买卖IC网 > PDF目录16765 > RNF-100-1/2-WH-FSP (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | RNF-100-1/2-WH-FSP |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 1,200 |
| 系列： | RNF-100 |
| 类型： | 套管，弹性 |
| 收缩比率： | 2 至 1 |
| 内径 - 提供： | 0.500"（12.7mm） |
| 内径 - 恢复： | 0.250"（6.4mm） |
| 已恢复的墙壁厚度： | 0.025"（0.64mm） |
| 材质： | 聚烯烃 |
| 特点： | 阻燃剂，防液体 |
| 颜色： | 白 |
| 其它名称： | 643267-000 |
SPECIFICATION RT-350 ISSUE 17
Page 3
4.3.1
Dimensions and Longitudinal Change
Measure three 6-inch (150 mm) specimens of tubing, as supplied, for length ± 1/32 inch
(± 1 mm) , and inside diameter in accordance with ASTM D 2671. Condition the specimens for 3 minutes in
a 200 ± 5°C (392 ± 9°F) oven, cool to 23 ± 3°C (73 ± 5°F) and then remeasure. Prior to and after
conditioning, the dimensions of the tubing shall be in accordance with Table 1 and the longitudinal change
shall be in accordance with Table 3. Calculate the longitudinal change as follows:
C =
L1 - L0
L0
x 100
Where:
C = Longitudinal Change [Percent]
L0 = Length Before Conditioning [Inches (mm) ]
L1 = Length After Conditioning [Inches (mm) ]
4.3.2
4.4
5.
5.1
5.2
5.3
Tensile Strength and Ultimate Elongation
Determine the tensile strength and ultimate elongation of the tubing in accordance with ASTM D 2671 using
1-inch (25-mm) bench marks, a 1-inch (25-mm) initial jaw separation, and jaw separation speed of 20 ± 2
inches (500 ± 50 mm) per minute.
REJECTION AND RETEST
Failure of any sample of tubing to conform to any one of the requirements of this specification shall be cause
for rejection of the lot represented. Tubing which has been rejected may be replaced or reworked to correct
the defects and resubmitted for acceptance. Before resubmitting, full particulars concerning previous
rejection and action taken to correct the defects shall be furnished to the inspector.
PREPARATION FOR DELIVERY
FORM
The tubing shall be supplied on spools or in lengths of 48 +1, -0 inches (1220 +25.4, -0 mm) unless
otherwise specified.
PACKAGING
Packaging shall be in accordance with good commercial practice.
MARKING
Each container of tubing shall be permanently and legibly marked with the size, quantity, manufacturer's
identification, specification number, and lot number.
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| EBM30DRMD-S288 | CONN EDGECARD 60POS .156 EXTEND |
| H2PXS-2006G | DIP CABLE - HDP20S/AE20G/X |
| RNF-100-1/2-RD-FSP | HEAT SHRINK TUBING |
| RNF-100-1/2-CL-FSP | HEAT SHRINK TUBING |
| ECM24DSUN | CONN EDGECARD 48POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RNF-100-1-4-4FT | 制造商:TE Connectivity 功能描述:HEAT SHRINK 25.4MM YELLOW 1.2M |
| RNF-100-1-4-RSU-STK | 制造商:TE Connectivity 功能描述:Yellow heatshrink tubing,25.4mm bore 制造商:TE Connectivity 功能描述:RNF100 TUBING 1 YELLOW |
| RNF-100-1-4-STK | 制造商:TE Connectivity 功能描述:HEATSHRINK 25.4MM YELLOW 1.2M 制造商:TE Connectivity 功能描述:HEATSHRINK, 25.4MM, YELLOW, 1.2M 制造商:TE Connectivity / Raychem 功能描述:HEATSHRINK, 25.4MM, YELLOW, 1.2M; I.D. Supplied - Metric:25.4mm; I.D. Supplied - Imperial:0.999"; I.D. Recovered Max - Metric:12.7mm; I.D. Recovered Max - Imperial:0.499"; Shrink Ratio:2:1; Shrink Tubing / Boot Material:PO ;RoHS Compliant: Yes |
| RNF-100-1-5-4FT | 制造商:TE Connectivity 功能描述:HEATSHRINK 25.4MM GREEN 1.2M |
| RNF-100-1-5-4FT | 制造商:TE Connectivity 功能描述:HEAT SHRINK 25.4MM GREEN 1.2M |
发布紧急采购，3分钟左右您将得到回复。