参数资料
型号: RNV14FAL15M0
厂商: Stackpole Electronics Inc
文件页数: 2/2页
文件大小: 0K
描述: RES MF HV .25W 15M OHM 1% AXIAL
产品培训模块: RNV Series
Pulse Handling Resistor Solutions
特色产品: RNV Series of Thru Hole Resistors
标准包装: 1
系列: RNV
电阻(欧姆): 15M
功率(瓦特): 0.25W,1/4W
复合体: 金属薄膜
特点: 阻燃涂层,防潮,脉冲耐受
温度系数: ±200ppm/°C
容差: ±1%
封装/外壳: 轴向
尺寸/尺寸: 0.094" 直径 x 0.236" L(2.40mm x 6.00mm)
端子数: 2
包装: 剪切带 (CT)
其它名称: RNV14FAL15M0CT
RNV Series
High Voltage Anti-moisture Metal Film Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Performance Characteristics
ppm/oC = (R-R 0 )/R 0 X 10 /{(T + 100)-t}
10 M ohm or more
Item
Solvent Resistance
Temperature Coefficient
Resistance (TCR)
Overload (short time)
Voltage Proof
Vibration
Insulation Resistance
Robustness of
Terminations
Resistance to Soldering
Heat
Performance
No serious scratches on the insulating surface
Within ±200ppm/oC
Resistance variation within ±(1% + 0.05 ohm)
Resistance variation within ±(0.5% + 0.05 ohm)
Resistance variation within ±(0.5% + 0.05 ohm)
4
Resistance variation within ±(0.5% + 0.05 ohm)
and no mechanical damage
No mechanical and electrical deterioration
Test Method
Resistor was dipped into solvent for 5 ± 0.5 minutes
Measured resistance (R 0 ohm) at room temperature (t oC) then
measured again at 100oC higher than room temperature
6
Applied DC voltage 2.5 times the rated voltage for 5 seconds ON,
45 seconds OFF. Repeated cycle 10 times. Maximum Overload
voltage is not more than 2 x Max Working Voltage
Resistor was clamped in the through of a 90oC metallic V-block and
was tested at provided AC potential voltage for 1 minute.
Test voltage: max overload voltage. Test voltage: 500V (AC)
Applied 1.5mm amplitude vibration to two directions, perpendicular to
each other, for 6 hours each. Total 12 hours.
Vibrating frequency is 10HZ - 2000HZ - 10HZ cycle in 20 minutes.
Repeat cycle.
Resistor was clamped in the through of a 90oC metallic V-block at DC
100V for 1 minute
Tensile test: The body of the part is fixed. The tensile force was
applied gradually up to 10N. Twist test: Terminal lead was rotated
360o of the original axis of the bent terminal, alternating direction for 3
rotations.
Resistance to wave soldering condition:
Temperature/Time-Profile in accordance to the CECC00802.
Max Temperature/Time: 260oC, 10 seconds
Solderability
More than 95% of the lead surface was covered by Dipped the lead into a solder bath (temperature 245oC ± 5oC) up to 4
new solder after the leads were dipped in the solder ± 0.8mm from the resistor body and held for 5 ± 0.5 seconds.
Rapid Change of
Temperature
Damp Heat
Endurance at 70oC
Cold Resistance
Heat Resistance
High Voltage Surge Test
Resistance variation within ±(0.5% + 0.05 ohm)
Resistance variation within ±(1.5% + 0.05 ohm)
Resistance variation within ±(1.5% + 0.05 ohm)
Resistance variation within ±(1.5% + 0.05 ohm)
Resistance variation within ±(1.5% + 0.05 ohm)
Resistance variation within ±(1% + 0.05 ohm)
Test: -55oC for 30 min., 25oC for 30 sec., 155oC for 30 min. 25oC for
30 sec. Resistance changed after continuous 5 cycles.
Temperature 40oC ± 2oC, relative humidity 90~95%, inside bath for
1.5 hour and shut voltage 0.5 hour. Repeated cycle for 1,000 hours.
Room temperature for 1 hour after test, then measured
In constant temperature chamber 70oC ± 2oC, applied rated DC
voltage for 1.5 hour and shut voltage for 0.5 hour.
Cycle repeated for 1,000 hours.
Resistor was put into a bath at fixed temp of -55oC ± 3oC for 2 hours.
After measured, left at room temp for 1 hour,
then measured again.
Resistor was put into a bath at fixed temp of 155oC ± 3oC for 16
hours. After measured, left at room temp for 1 hour,
then measured again.
In accordance with IEC60065.14.1, 50 discharges from a 1nF
capacitor charged to Vmax; Figure 2. 12 discharges/minute
10
9
8
7
6
5
4
0.01
0.1
1
10
100
Rx (M ? )
Operating Temperature Range: -55oC to +155oC
Rev Date: 06/19/2012
This specification may be changed at any time without prior notice
Please confirm technical specifications before you order and/or use.
2
www.seielect.com
marketing@seielect.com
相关PDF资料
PDF描述
RNV14FAL1M50 RES MF HV .25W 1.5M OHM 1% AXIAL
RNV14FAL1M00 RES MF HV .25W 1M OHM 1% AXIAL
RNV14FAL820K RES MF HV .25W 820K OHM 1% AXIAL
RNV14FAL750K RES MF HV .25W 750K OHM 1% AXIAL
RNV14FAL620K RES MF HV .25W 620K OHM 1% AXIAL
相关代理商/技术参数
参数描述
RNV14FAL160K 功能描述:RES MF HV .25W 160K OHM 1% AXIAL RoHS:是 类别:电阻器 >> 通孔电阻器 系列:RNV 产品变化通告:Global Part Number Change 9/Aug/2010 产品目录绘图:RSF Series Side 标准包装:1 系列:RSF 电阻(欧姆):4.7 功率(瓦特):2W 复合体:金属氧化物薄膜 特点:耐燃 温度系数:±200ppm/°C 容差:±5% 封装/外壳:轴向 尺寸/尺寸:0.197" 直径 x 0.591" L(5.00mm x 15.00mm) 高度:- 端子数:2 包装:剪切带 (CT) 其它名称:RSF24.7JRCTRSF24.7JRCT-NDRSF2JT4R70CT
RNV14FAL180K 功能描述:RES MF HV .25W 180K OHM 1% AXIAL RoHS:是 类别:电阻器 >> 通孔电阻器 系列:RNV 产品变化通告:Global Part Number Change 9/Aug/2010 产品目录绘图:RSF Series Side 标准包装:1 系列:RSF 电阻(欧姆):4.7 功率(瓦特):2W 复合体:金属氧化物薄膜 特点:耐燃 温度系数:±200ppm/°C 容差:±5% 封装/外壳:轴向 尺寸/尺寸:0.197" 直径 x 0.591" L(5.00mm x 15.00mm) 高度:- 端子数:2 包装:剪切带 (CT) 其它名称:RSF24.7JRCTRSF24.7JRCT-NDRSF2JT4R70CT
RNV14FAL1M00 功能描述:RES MF HV .25W 1M OHM 1% AXIAL RoHS:是 类别:电阻器 >> 通孔电阻器 系列:RNV 产品变化通告:Global Part Number Change 9/Aug/2010 产品目录绘图:RSF Series Side 标准包装:1 系列:RSF 电阻(欧姆):4.7 功率(瓦特):2W 复合体:金属氧化物薄膜 特点:耐燃 温度系数:±200ppm/°C 容差:±5% 封装/外壳:轴向 尺寸/尺寸:0.197" 直径 x 0.591" L(5.00mm x 15.00mm) 高度:- 端子数:2 包装:剪切带 (CT) 其它名称:RSF24.7JRCTRSF24.7JRCT-NDRSF2JT4R70CT
RNV14FAL1M50 功能描述:RES MF HV .25W 1.5M OHM 1% AXIAL RoHS:是 类别:电阻器 >> 通孔电阻器 系列:RNV 产品变化通告:Global Part Number Change 9/Aug/2010 产品目录绘图:RSF Series Side 标准包装:1 系列:RSF 电阻(欧姆):4.7 功率(瓦特):2W 复合体:金属氧化物薄膜 特点:耐燃 温度系数:±200ppm/°C 容差:±5% 封装/外壳:轴向 尺寸/尺寸:0.197" 直径 x 0.591" L(5.00mm x 15.00mm) 高度:- 端子数:2 包装:剪切带 (CT) 其它名称:RSF24.7JRCTRSF24.7JRCT-NDRSF2JT4R70CT
RNV14FAL200K 功能描述:RES MF HV .25W 200K OHM 1% AXIAL RoHS:是 类别:电阻器 >> 通孔电阻器 系列:RNV 产品变化通告:Global Part Number Change 9/Aug/2010 产品目录绘图:RSF Series Side 标准包装:1 系列:RSF 电阻(欧姆):4.7 功率(瓦特):2W 复合体:金属氧化物薄膜 特点:耐燃 温度系数:±200ppm/°C 容差:±5% 封装/外壳:轴向 尺寸/尺寸:0.197" 直径 x 0.591" L(5.00mm x 15.00mm) 高度:- 端子数:2 包装:剪切带 (CT) 其它名称:RSF24.7JRCTRSF24.7JRCT-NDRSF2JT4R70CT