参数资料
型号: RPE5C1H222J2M1A03A
厂商: Murata Electronics North America
文件页数: 28/57页
文件大小: 0K
描述: CAP CER 2200PF 50V 5% RADIAL
标准包装: 2,000
系列: RPE
电容: 2200pF
电压 - 额定: 50V
容差: ±5%
温度系数: C0G,NP0
安装类型: 通孔
工作温度: -55°C ~ 125°C
应用: 通用
封装/外壳: 径向
尺寸/尺寸: 0.197" L x 0.124" W(5.00mm x 3.15mm)
高度 - 座高(最大): 0.197"(5.00mm)
引线间隔: 0.197"(5.00mm)
包装: 带盒(TB)
引线型: 纽结
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
Speci?cations and Test Methods
Specification
C49E.pdf
Mar.12,2014
No. AEC-Q200 Test Item Temperature Compensating Type High Dielectric Constant Type
AEC-Q200 Test Method
(Char. X8G)
(Char. X8L)
2
1
Pre-and Post-Stress
Electrical Test
High Temperature
The measured and observed characteristics should satisfy the
Exposure (Storage) specifications in the following table.
Appearance No defects or abnormalities
2
Capacitance Within ±3% or ±0.3pF
Change (Whichever is larger)
Q U 350
Q/D.F.
Within ±12.5%
0.04 max.
Sit the capacitor for 1,000±12h at 150±3°C. Let sit for 24±2h at
room temperature, then measure.
I.R.
More than 1,000M Ω or 50M Ω · μF (Whichever is smaller)
Temperature
Cycling
The measured and observed characteristics should satisfy the
specifications in the following table.
Perform the 1,000 cycles according to the four heat treatments
listed in the following table. Let sit for 24±2h at *room condition,
Appearance
No defects or abnormalities except color change of outer
coating
then measure.
Step 1
2
3
4
3
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
Temp. (°C) -55+0/-3 Room Temp. 150+3/-0 Room Temp.
Time (min.) 15±3 1 15±3 1
Q/D.F.
Q U 350
0.05 max.
Perform the heat treatment at 150+0/-10°C for 60±5 min and
I.R.
Moisture
Resistance
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
then let sit for 24±2h at *room condition. (for Char. X8L)
Apply the 24h heat (25 to 65°C) and humidity (80 to 98%)
treatment shown below, 10 consecutive times.
Appearance No defects or abnormalities
Let sit for 24±2h at *room condition, then measure.
Humidity
Humidity Humidity Humidity
Humidity
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
(°C)
70
65
90-98%
80-98% 90-98%
80-98%
90-98%
60
Q/D.F.
Q U 200
0.05 max.
55
50
45
4
40
35
30
-2 °C
25
20
15
10
+10
Initial measurement
I.R.
Biased Humidity
500M Ω or 25M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
5
0
-5
-10
One cycle = 24 hours
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Hours
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8k Ω resistor)
at 85±3°C and 80 to 85% humidity for 1,000±12h.
Appearance No defects or abnormalities
Remove and let sit for 24±2h at *room condition, then measure.
5
Capacitance Within ±5% or ±0.5pF
Change (Whichever is larger)
Within ±12.5%
The charge/discharge current is less than 50mA.
Q/D.F.
Q U 200
0.05 max.
Perform the heat treatment at 150+0/-10°C for 60±5 min and
I.R.
Operational Life
Appearance
500M Ω or 25M Ω · μF min. (Whichever is smaller)
The measured and observed characteristics should satisfy the
specifications in the following table.
No defects or abnormalities except color change of outer
coating
then let sit for 24±2h at *room condition. (for Char. X8L)
Apply 150% of the rated voltage for 1,000±12h at 150±3°C.
Let sit for 24±2h at *room condition, then measure.
The charge/discharge current is less than 50mA.
6
Capacitance Within ±3% or ±0.3pF
Change (Whichever is larger)
Within ±12.5%
Apply test voltage for 60±5 min at test temperature.
Q/D.F.
Q U 350
0.04 max.
Remove and let sit for 24±2h at *room condition.
(for Char. X8L)
I.R.
1,000M Ω or 50M Ω · μF min. (Whichever is smaller)
7
External Visual
No defects or abnormalities
Visual inspection
8
Physical Dimension Within the specified dimensions
Using calipers and micrometers.
9
Marking
To be easily legible.
Visual inspection
* “room condition” Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
26
相关PDF资料
PDF描述
DEBE33F472ZB3B CAP CER 4700PF 3.15KV RADIAL
RPE5C2A152J2S1A03A CAP CER 1500PF 100V 5% RADIAL
DG2018DN-T1-E4 IC SWITCH DUAL SPDT 16QFN
RPE5C2A152J2M2A03A CAP CER 1500PF 100V 5% RADIAL
RPE5C2A152J2M1A03A CAP CER 1500PF 100V 5% RADIAL
相关代理商/技术参数
参数描述
RPE5C1H222J2M1B03A 功能描述:多层陶瓷电容器MLCC - 含引线 2200pF 50volts C0G 5% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C1H222J2M2B03A 功能描述:多层陶瓷电容器MLCC - 含引线 2200pF 50volts C0G 5% 5.0mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C1H222J2P1B03A 功能描述:多层陶瓷电容器MLCC - 含引线 2200pF 50volts C0G 5% 2.5mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C1H222J2P1C03B 功能描述:多层陶瓷电容器MLCC - 含引线 2200pF 50volts C0G 5% 2.5mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型:
RPE5C1H222J2P1D03B 功能描述:多层陶瓷电容器MLCC - 含引线 2200pF 50volts C0G 5% 2.5mm L/S RoHS:否 制造商:AVX 电容:470 pF 容差:10 % 电压额定值:3 kV 端接类型:Radial 工作温度范围: 温度系数/代码:X7R 引线间隔:5.08 mm 产品:Automotive MLCCs 引线类型: